From: Wolfgang Wegner <wolfgang@leila.ping.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] coldfire support
Date: Mon, 22 Feb 2010 13:08:57 +0100 [thread overview]
Message-ID: <20100222120857.GF23389@leila.ping.de> (raw)
In-Reply-To: <4C52C63A237047998423F1C7037B5D7D@itd210>
Hi,
On Mon, Feb 22, 2010 at 04:30:06PM +0530, Thirumalai wrote:
> Hi denx,
> I just want to know whether the coldfire processor is supported by
> u-boot and what toolchains need to be used for compilation. Whether ELDK
> will support or not ?
starting with the downside: unfortunately there is no ELDK for
Coldfire.
U-Boot support for Coldfire is in place and running fine so far, although
not as active (and feature-rich) as PPC. Of course, it would have been
helpful if you would have mentioned which Coldfire you (intend to) use!
As a starting point, have a look at the evaluation boards in
board/freescale/m5...
I am using the toolchain from codesourcery:
http://www.codesourcery.com/sgpp/lite/coldfire
(go to Download and then select either uClinux or ELF)
Currently I am staying with the older 4.3.3 release, but also
successfully tested the current 4.4.3 for U-Boot.
Regards,
Wolfgang
next prev parent reply other threads:[~2010-02-22 12:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-22 11:00 [U-Boot] coldfire support Thirumalai
2010-02-22 12:08 ` Wolfgang Wegner [this message]
2010-02-25 6:27 ` TC Liew
2010-02-25 11:16 ` angelo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100222120857.GF23389@leila.ping.de \
--to=wolfgang@leila.ping.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox