From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Frysinger Date: Thu, 18 Mar 2010 21:11:27 -0400 Subject: [U-Boot] uboot on microblaze, compilation error In-Reply-To: <4BA1F26F.3010501@monstr.eu> References: <001701cac601$5a380c50$c801a8c0@xeon> <201003171908.26181.vapier@gentoo.org> <4BA1F26F.3010501@monstr.eu> Message-ID: <201003182111.28112.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thursday 18 March 2010 05:29:19 Michal Simek wrote: > Mike Frysinger wrote: > > On Wednesday 17 March 2010 14:36:38 Horst Gall wrote: > >> I try to compile an actual version of u-boot for xilinx microblaze. > >> > >> The linker ends with the error-message: > >> ... mb-ld.real:u-boot.lds:1: parse error > >> > >> In u-boot main-directory I found the file 'u-boot.lds': > >> OUTPUT_ARCH(1) > >> ENTRY(_start) > >> ... > >> cpu/1/start.o (.text) > >> ... > >> > >> When I change the "1" to "microblaze" it works: > >> OUTPUT_ARCH(microblaze) > >> ENTRY(_start) > >> ... > >> cpu/microblaze/start.o (.text) > >> ... > >> > >> After "make ...config" my modification is overwritten. > >> How can I fix this problem? > > > > add "#undef microblaze" to the top of board/xilinx/microblaze-generic/u- > > boot.lds > > Mike is right. I expect you are using toolchain from EDK where the > problem is. Linux toolchain are ok. i dont think the toolchain is broken. this is standard gcc behavior for all arches. i would check the microblaze gcc port, but it doesnt seem to be mainlined at gcc.gnu.org, so ive lost interest. -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20100318/1faf3d82/attachment.pgp