From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/7] fdt_support: add partitions fixup in mtd node
Date: Sun, 21 Mar 2010 20:08:52 +0100 [thread overview]
Message-ID: <20100321190852.EEABD4C022@gemini.denx.de> (raw)
In-Reply-To: <1268755808-24931-5-git-send-email-agust@denx.de>
Dear Anatolij Gustschin,
In message <1268755808-24931-5-git-send-email-agust@denx.de> you wrote:
> Allow overriding defined partitions in the device tree blob
> using partition info defined in the 'mtdparts' environment
> variable.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Gerald Van Baren <vanbaren@cideas.com>
> ---
> Changes since first version:
> - in fdt_fixup_mtdparts() check the presence of "mtdparts"
> environment variable and don't proceed with initialisation
> if the variable is not defined (suppresses warning while booting).
>
> common/cmd_mtdparts.c | 2 +-
> common/fdt_support.c | 219 +++++++++++++++++++++++++++++++++++++++++++
> include/fdt_support.h | 2 +
> include/jffs2/load_kernel.h | 1 +
> include/mtd_node.h | 11 ++
> 5 files changed, 234 insertions(+), 1 deletions(-)
> create mode 100644 include/mtd_node.h
Applied to "next" branch. Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I think there's a world market for about five computers.
-- attr. Thomas J. Watson (Chairman of the Board, IBM), 1943
next prev parent reply other threads:[~2010-03-21 19:08 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-16 16:10 [U-Boot] [PATCH v2 0/7] Add support for PDM360NG board Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 1/7] mpc512x: make MEM IO Control configuration a board config option Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 2/7] mpc512x: add multi serial PSC support Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 3/7] mpc5121: add PSC serial communication routines Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 4/7] fdt_support: add partitions fixup in mtd node Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 5/7] mpc5121: add common post_word_load/store code Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 6/7] mpc5121: add support for PDM360NG board Anatolij Gustschin
2010-03-16 16:10 ` [U-Boot] [PATCH v2 7/7] mpc5121: cpu/mpc512x/diu.c: fix warnings Anatolij Gustschin
2010-03-21 19:24 ` Wolfgang Denk
2010-03-21 19:23 ` [U-Boot] [PATCH v2 6/7] mpc5121: add support for PDM360NG board Wolfgang Denk
2010-04-14 10:39 ` Anatolij Gustschin
2010-04-14 14:21 ` [U-Boot] [PATCH v3 0/3] Add " Anatolij Gustschin
2010-04-14 14:21 ` [U-Boot] [PATCH v3 1/3] mpc5121: determine RAM size using get_ram_size() Anatolij Gustschin
2010-04-14 14:21 ` [U-Boot] [PATCH v3 2/3] mpc5121: add support for PDM360NG board Anatolij Gustschin
2010-04-14 14:21 ` [U-Boot] [PATCH v3 3/3] mpc5121: pdm360ng: add coprocessor POST Anatolij Gustschin
2010-04-14 15:40 ` Wolfgang Denk
2010-04-15 9:18 ` Detlev Zundel
2010-04-15 9:25 ` Anatolij Gustschin
2010-04-15 11:48 ` Wolfgang Denk
2010-04-15 11:46 ` Wolfgang Denk
2010-04-15 10:24 ` Anatolij Gustschin
2010-04-15 11:54 ` Wolfgang Denk
2010-04-14 15:48 ` [U-Boot] [PATCH v3 2/3] mpc5121: add support for PDM360NG board Wolfgang Denk
2010-04-15 12:32 ` Anatolij Gustschin
2010-04-15 12:43 ` Stefan Roese
2010-04-15 15:18 ` Wolfgang Denk
2010-04-14 15:31 ` [U-Boot] [PATCH v3 1/3] mpc5121: determine RAM size using get_ram_size() Wolfgang Denk
2010-04-15 12:20 ` Anatolij Gustschin
2010-03-21 19:09 ` [U-Boot] [PATCH v2 5/7] mpc5121: add common post_word_load/store code Wolfgang Denk
2010-03-21 19:08 ` Wolfgang Denk [this message]
2010-03-21 19:05 ` [U-Boot] [PATCH v2 3/7] mpc5121: add PSC serial communication routines Wolfgang Denk
2010-03-21 19:04 ` [U-Boot] [PATCH v2 2/7] mpc512x: add multi serial PSC support Wolfgang Denk
2010-03-21 19:03 ` [U-Boot] [PATCH v2 1/7] mpc512x: make MEM IO Control configuration a board config option Wolfgang Denk
2010-03-21 19:00 ` [U-Boot] [PATCH v2 0/7] Add support for PDM360NG board Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100321190852.EEABD4C022@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox