From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Wed, 14 Apr 2010 10:42:50 +0200 Subject: [U-Boot] [PATCH V2] AT49BV322A Flash: the erase regions are in the wrong order. In-Reply-To: References: Message-ID: <201004141042.50802.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tuesday 13 April 2010 18:34:00 David Wu wrote: > The device id for this Flash is 0xc8. > > Signed-off-by: David Wu > --- > drivers/mtd/cfi_flash.c | 4 +++- > 1 files changed, 3 insertions(+), 1 deletions(-) > > diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c > index fdba297..af86f99 100644 > --- a/drivers/mtd/cfi_flash.c > +++ b/drivers/mtd/cfi_flash.c > @@ -1690,8 +1690,10 @@ static void flash_fixup_atmel(flash_info_t *info, > struct cfi_qry *qry) !!!!!!!!!!!!!!!!!! Sill line wrapped. I could fix this here, but since your other patches are also line wrapped you need to fix your mailer setup anyway. Best would be to send via "git send-email". If this is not possible, take a look at this for correct mail client setup for sending patches: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/email- clients.txt;h=945ff3fda4337b089515dfced483fee7b941edcf;hb=HEAD Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de