From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Fri, 23 Apr 2010 10:16:19 +0200 Subject: [U-Boot] support for spansion s29gl-p flash? In-Reply-To: <4144DE893D96D6448EB2603A0F9BC05A06D2DAA9@xmb-sjc-239.amer.cisco.com> References: <4144DE893D96D6448EB2603A0F9BC05A06D2DA4D@xmb-sjc-239.amer.cisco.com> <1272003998.5819.45.camel@txema-desktop> <4144DE893D96D6448EB2603A0F9BC05A06D2DAA9@xmb-sjc-239.amer.cisco.com> Message-ID: <201004231016.19588.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday 23 April 2010 09:00:58 Aditya Ojha (adojha) wrote: > Thanks Txema. I might be hitting the same problem with the Numonyx > flash. I will check enabling debugs. > I see that you had submitted a potential patch, did it make it into the > code-base? No. The patch was not in a state of being added to the mainline repository, I'm afraid. But back to your question: Do you use 16bit or 8bit chip-width in your design? I suspect that you will have no problems when using 16bit. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de