From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 1 May 2010 05:24:40 +0200
Subject: [U-Boot] [OT] - Seeking information Re: Memory Mapped CF Card
	(IDE) and Linux
In-Reply-To: <4BDAE529.20903@gmail.com>
References: <4BDAE529.20903@gmail.com>
Message-ID: <201005010524.40949.marek.vasut@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dne P? 30. dubna 2010 16:11:53 Graeme Russ napsal(a):
> Hi All,
> 
> I'm looking for information on how to access a Compact Flash card which is
> memory-mapped (from 0x20001000)
> 
> From what I have read, there a 3 address lines (8 addresses) which access
> IDE registers within the CF chip
> 
> My question is, how do I access such a custom address range within Linux?
> 
> I'm looking at the 'OF-platform PATA driver' which appears to be what I
> want (a very basic IDE driver) but I am a bit lost on how to set up a
> specific base address.
> 
> Where should I look for examples of CF cards mapped to specific address
> spaces?
> 
> TIA

Hey, look at pata_platform.c driver. Without any additional setup, your drive 
will work. You just specify IRQ line (if any) and CTL and CMD addresses.

Cheers
> 
> Graeme
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot