[U-Boot] [PATCH-V2 4/4] AM35x: Add support for EMIF4

[Wolfgang Denk <wd@denx.de>]

Dear hvaibhav at ti.com,

In message <1272034546-26041-6-git-send-email-hvaibhav@ti.com> you wrote:
> From: Vaibhav Hiremath <hvaibhav@ti.com>
> 
> This patch adds support for the EMIF4 interface
> available in the AM35x processors.
> 
> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
> Signed-off-by: Sanjeev Premi <premi@ti.com>
> ---
>  arch/arm/cpu/arm_cortexa8/omap3/Makefile    |    3 +
>  arch/arm/cpu/arm_cortexa8/omap3/emif4.c     |  168 +++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-omap3/cpu.h       |   24 ++++
>  arch/arm/include/asm/arch-omap3/emif4.h     |   79 +++++++++++++
>  arch/arm/include/asm/arch-omap3/sys_proto.h |    3 +
>  5 files changed, 277 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/cpu/arm_cortexa8/omap3/emif4.c
>  create mode 100644 arch/arm/include/asm/arch-omap3/emif4.h
> 
> diff --git a/arch/arm/cpu/arm_cortexa8/omap3/Makefile b/arch/arm/cpu/arm_cortexa8/omap3/Makefile
> index 8cc7802..0a23fa5 100644
> --- a/arch/arm/cpu/arm_cortexa8/omap3/Makefile
> +++ b/arch/arm/cpu/arm_cortexa8/omap3/Makefile
> @@ -36,6 +36,9 @@ COBJS	+= mem.o
>  ifdef	CONFIG_SDRC
>  COBJS	+= sdrc.o
>  endif
> +ifdef	CONFIG_EMIF4
> +COBJS	+= emif4.o
> +endif

Don't use ifdef, use COBJS-$(CONFIG_EMIF4) instead.

> diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
> index 34e4e0d..7b425be 100644
> --- a/arch/arm/include/asm/arch-omap3/sys_proto.h
> +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
> @@ -35,6 +35,9 @@ void memif_init(void);
>  void sdrc_init(void);
>  void do_sdrc_init(u32, u32);
>  #endif
> +#if defined(CONFIG_EMIF4)
> +void emif4_init(void);
> +#endif

I guess you can omit the #ifdef here, right?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A failure will not appear until a unit has passed final inspection.