From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Devkit8000: Fix compilation after changes in dm9000
Date: Tue, 11 May 2010 06:25:58 +0200 [thread overview]
Message-ID: <201005110625.58852.marek.vasut@gmail.com> (raw)
In-Reply-To: <201005110547.40562.marek.vasut@gmail.com>
Dne ?t 11. kv?tna 2010 05:47:40 Marek Vasut napsal(a):
> Dne ?t 11. kv?tna 2010 05:28:38 Marek Vasut napsal(a):
> > Dne P? 7. kv?tna 2010 18:58:34 Thomas Weber napsal(a):
> > > On 07.05.2010 17:15, Wolfgang Denk wrote:
> > > Dear Thomas Weber,
> > >
> > > In message <1273242366-6552-1-git-send-email-weber@corscience.de>
> > >
> > > <1273242366-6552-1-git-send-email-weber@corscience.de> you wrote:
> > > In commit a45dde2293c816138e53c26eca6fd0322583f9a6 the I/O accessor
> > > for
> > >
> > > the DM9000 is changed.
> > >
> > > The definition of __io is required to use the standard I/O accessors
> > > from asm/io.h.
> > >
> > > Signed-off-by: Thomas Weber <weber@corscience.de> <weber@corscience.de>
> > > ---
> > >
> > > include/configs/devkit8000.h | 2 ++
> > > 1 files changed, 2 insertions(+), 0 deletions(-)
> > >
> > > diff --git a/include/configs/devkit8000.h
> > > b/include/configs/devkit8000.h index 7d1332f..6e53c0d 100644
> > > --- a/include/configs/devkit8000.h
> > > +++ b/include/configs/devkit8000.h
> > > @@ -31,6 +31,7 @@
> > >
> > > #ifndef __CONFIG_H
> > > #define __CONFIG_H
> > >
> > > +
> > >
> > > Unrelated (und unneeded) change. Please omit this.
> > >
> > > /* High Level Configuration Options */
> > >
> > > #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
> > > #define CONFIG_OMAP 1 /* in a TI OMAP core */
> > >
> > > @@ -79,6 +80,7 @@
> > >
> > > #define CONFIG_DM9000_USE_16BIT 1
> > > #define CONFIG_DM9000_NO_SROM 1
> > > #undef CONFIG_DM9000_DEBUG
> > >
> > > +#define __io
> > >
> > > Hm... the commit message says "__io is required to use the standard
> > >
> > > I/O accessors" - but I don't see any of these in this definition here?
> > >
> > > Best regards,
> > >
> > > Wolfgang Denk
> > >
> > > Hi,
> > >
> > > thanks for reviewing the patch.
> > >
> > > In
> > > dm9000.c is <asm/io.h> included and outb, etc. used
> > > and in
> > > arch/arm/include/asm/io.h +201
> > > I found #ifdef __io
> > > but __io wasn't defined.
> > >
> > > I also think, that all arm-boards that uses the dm9000 will have this
> > > problem at the moment. I tried to compile at91sam9261 and got the same
> > > problem.
> > >
> > > Because I have an other problem with gcc I cannot compile completely.
> > >
> > > Thomas
> >
> > 52dbac69c27dee67a4c051b1055d93b0ac4e2062 <-- this one probably causes the
> > other errors
>
> Interesting ... the commit 'doesn't seem to be there'
>
> It seems someone made some inccorect operation with git and some patches
> were forgotten/rewritten by old files.
I take what I said back, it's there, I mislooked.
But, here's a workaround-patch (unapplicable obviously). Conclusion from why it
works with this is up to you:
diff --git a/include/common.h b/include/common.h
index 8bca04f..ce67403 100644
--- a/include/common.h
+++ b/include/common.h
@@ -218,7 +218,7 @@ void hang (void) __attribute__
((noreturn));
/* */
phys_size_t initdram (int);
int display_options (void);
-void print_size(unsigned long long, const char *);
+void print_size(unsigned /*long*/ long, const char *);
int print_buffer (ulong addr, void* data, uint width, uint count, uint
linelen);
/* common/main.c */
diff --git a/lib/display_options.c b/lib/display_options.c
index 86df05d..146e50a 100644
--- a/lib/display_options.c
+++ b/lib/display_options.c
@@ -43,11 +43,11 @@ int display_options (void)
* xxx GiB, xxx.y GiB, etc as needed; allow for optional trailing string
* (like "\n")
*/
-void print_size(unsigned long long size, const char *s)
+void print_size(unsigned /*long*/ long size, const char *s)
{
unsigned long m = 0, n;
- static const char names[] = {'E', 'P', 'T', 'G', 'M', 'K'};
- unsigned long long d = 1ULL << (10 * ARRAY_SIZE(names));
+ static const char names[] = {/*'E', 'P', 'T',*/ 'G', 'M', 'K'};
+ unsigned long /*long*/ d = 1ULL << (10 * ARRAY_SIZE(names));
char c = 0;
unsigned int i;
@@ -59,7 +59,7 @@ void print_size(unsigned long long size, const char *s)
}
if (!c) {
- printf("%llu Bytes%s", size, s);
+ printf("%lu Bytes%s", size, s);
return;
}
next prev parent reply other threads:[~2010-05-11 4:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-07 14:26 [U-Boot] [PATCH] Devkit8000: Fix compilation after changes in dm9000 Thomas Weber
2010-05-07 15:15 ` Wolfgang Denk
2010-05-07 16:58 ` Thomas Weber
2010-05-07 19:11 ` Mike Frysinger
2010-05-11 3:19 ` Marek Vasut
2010-05-11 3:28 ` Marek Vasut
2010-05-11 3:47 ` Marek Vasut
2010-05-11 4:25 ` Marek Vasut [this message]
2010-05-11 8:46 ` Thomas Weber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201005110625.58852.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox