From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Thu, 27 May 2010 08:56:35 +0200
Subject: [U-Boot] Debugging u-boot with bdi3000 basics
In-Reply-To: <AANLkTik4FYpDAK9bHVKZrNDMvUyCCg-xDaBqTkqyZovL@mail.gmail.com>
References: <AANLkTin4xXaXkJPzJJhHkThwHbmVbf0e3M-HAisc_pxm@mail.gmail.com>
	<AANLkTik4FYpDAK9bHVKZrNDMvUyCCg-xDaBqTkqyZovL@mail.gmail.com>
Message-ID: <20100527065635.3C3DFEAC238@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Alan Carvalho de Assis,

In message <AANLkTik4FYpDAK9bHVKZrNDMvUyCCg-xDaBqTkqyZovL@mail.gmail.com> you wrote:
> Hi Mark,
> 
> On 5/27/10, Mark Fanara <mark.fanara@gmail.com> wrote:
> ...
> >
> > 2) I am using a bdi3000. Is there no way to build u-boot so that it is
> > directly loaded to RAM by the debugger and does not relocate itself?
> >
> 
> #define CONFIG_SKIP_RELOCATE_UBOOT

Note that this doesn't exist on ll architectures. For example on
PowerPC, we will always relocate.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Die ganzen Zahlen hat der liebe Gott  geschaffen,  alles  andere  ist
Menschenwerk...                                     Leopold Kronecker