From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Mon, 31 May 2010 20:55:04 +0200 Subject: [U-Boot] AVR32 / ATNGW100 FLASH adressing issues In-Reply-To: <4C03C0CA.50504@emk-elektronik.de> References: <4C03C0CA.50504@emk-elektronik.de> Message-ID: <20100531185504.B3775C15848@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Reinhard Meyer, In message <4C03C0CA.50504@emk-elektronik.de> you wrote: > > currently the actual u-Boot (U-Boot 2010.03-00351-g40792d6-dirty) for > AVR32/ATNGW100 defines FLASH to be at 0x00000000 (which is the true > physical address): ... > however the "flinfo" command show FLASH to be at 0xa0000000 (which is > translated to 0x00000000 by default) ... > I think that the issue should be fixed by making sure FLASH is detected > at 0x00000000 and NOT at 0xa0000000, correct? This has been discussed in one of the longer and more heated discussions on that list; see thread starting here: http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/66904 Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The only thing necessary for the triumph of evil is for good men to do nothing. - Edmund Burke