From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Tue, 8 Jun 2010 18:34:19 +0200
Subject: [U-Boot] Problems flashing kernel
In-Reply-To: <4C0E5B31.3010903@denx.de>
References: <20100608124034.GA2890@boggieman> <4C0E4028.8030305@denx.de>
	<20100608132128.GA28991@boggieman> <4C0E5433.4050704@denx.de>
	<20100608144144.GB28991@boggieman> <4C0E5B31.3010903@denx.de>
Message-ID: <20100608163419.GC28991@boggieman>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tue, Jun 08, 2010 at 05:01:05PM +0200, Stefano Babic wrote:
> Kristoffer Ericson wrote:
> 
> > It worked earlier for unknown reasons, but no longer does. It has 
> > only worked once. Erasing all the flash (aside from first 512kb)
> > works without any error messages, but when trying to flash it still
> > insists that the flash is not erased. Looking with md also seems to
> > confirm that (data found).
> 
> Maybe it has nothing with your problem, but because you have Intel flash
> it could be possible you need to send the Unlock sequence. Have you
> tried setting CONFIG_SYS_FLASH_PROTECTION ?

I already have it set:
#define	CONFIG_SYS_FLASH_PROTECTION	1
I just figured it was an auto-protect flash setting. Is that correct?
Should I try it without?
> 
> Best regards,
> Stefano Babic
> 
> -- 
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================