* [U-Boot] [PATCH 1/4 v2] musb: Use name based initialization for musb_config
@ 2010-06-09 10:45 Ajay Kumar Gupta
2010-06-09 10:45 ` [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus Ajay Kumar Gupta
0 siblings, 1 reply; 6+ messages in thread
From: Ajay Kumar Gupta @ 2010-06-09 10:45 UTC (permalink / raw)
To: u-boot
Changed musb_config initialization for omap3.c, davinci.c
and da8xx.c using name of structure fields. This would cause
the uninitialized field to be null by default and thus would
help in avoiding to init some flags required to be set only
for a few selected platforms.
CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
---
drivers/usb/musb/da8xx.c | 6 +++---
drivers/usb/musb/davinci.c | 6 +++---
drivers/usb/musb/omap3.c | 6 +++---
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 40bfe44..617d88e 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -27,9 +27,9 @@
/* MUSB platform configuration */
struct musb_config musb_cfg = {
- (struct musb_regs *)DA8XX_USB_OTG_CORE_BASE,
- DA8XX_USB_OTG_TIMEOUT,
- 0
+ .regs = (struct musb_regs *)DA8XX_USB_OTG_CORE_BASE,
+ .timeout = DA8XX_USB_OTG_TIMEOUT,
+ .musb_speed = 0,
};
/*
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 8fbadc9..f56f2df 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -28,9 +28,9 @@
/* MUSB platform configuration */
struct musb_config musb_cfg = {
- (struct musb_regs *)MENTOR_USB0_BASE,
- DAVINCI_USB_TIMEOUT,
- 0
+ .regs = (struct musb_regs *)MENTOR_USB0_BASE,
+ .timeout = DAVINCI_USB_TIMEOUT,
+ .musb_speed = 0,
};
/* MUSB module register overlay */
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index 3bfd0a0..785629c 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -36,9 +36,9 @@
static int platform_needs_initialization = 1;
struct musb_config musb_cfg = {
- (struct musb_regs *)MENTOR_USB0_BASE,
- OMAP3_USB_TIMEOUT,
- 0
+ .regs = (struct musb_regs *)MENTOR_USB0_BASE,
+ .timeout = OMAP3_USB_TIMEOUT,
+ .musb_speed = 0,
};
/*
--
1.6.2.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus
2010-06-09 10:45 [U-Boot] [PATCH 1/4 v2] musb: Use name based initialization for musb_config Ajay Kumar Gupta
@ 2010-06-09 10:45 ` Ajay Kumar Gupta
2010-06-09 10:45 ` [U-Boot] [PATCH 3/4 v2] omap3evm: Add board revision function Ajay Kumar Gupta
2010-06-09 23:05 ` [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus Mike Frysinger
0 siblings, 2 replies; 6+ messages in thread
From: Ajay Kumar Gupta @ 2010-06-09 10:45 UTC (permalink / raw)
To: u-boot
MUSB PHY on OMAP3EVM Rev >= E uses external Vbus supply to support
500mA of power.We need to program MUSB PHY to use external Vbus
for this purpose.
Adding 'extvbus' member in musb_config structure which should be set
by all the boards where MUSB interface is using external Vbus supply.
Also added ULPI bus control register read/write abstraction for
Blackfin processor as it doesn't have ULPI registers.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
---
Changes from v1:
- Added ULPI register read/write abstraction for Blackfin.
drivers/usb/musb/musb_core.c | 7 +++++++
drivers/usb/musb/musb_core.h | 28 +++++++++++++++++++++++++++-
2 files changed, 34 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 7766069..dc740cf 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -34,6 +34,7 @@ void musb_start(void)
{
#if defined(CONFIG_MUSB_HCD)
u8 devctl;
+ u8 busctl;
#endif
/* disable all interrupts */
@@ -45,6 +46,12 @@ void musb_start(void)
/* put into basic highspeed mode and start session */
writeb(MUSB_POWER_HSENAB, &musbr->power);
#if defined(CONFIG_MUSB_HCD)
+ /* Program PHY to use EXT VBUS if required */
+ if (musb_cfg.extvbus == 1) {
+ busctl = musb_read_ulpi_buscontrol(musbr);
+ musb_write_ulpi_buscontrol(musbr, busctl | ULPI_USE_EXTVBUS);
+ }
+
devctl = readb(&musbr->devctl);
writeb(devctl | MUSB_DEVCTL_SESSION, &musbr->devctl);
#endif
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 9a1fb4f..a63428b 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -112,7 +112,10 @@ struct musb_regs {
u16 rxfifoadd;
u32 vcontrol;
u16 hwvers;
- u16 reserved2[5];
+ u16 reserved2a[1];
+ u8 ulpi_busctl;
+ u8 reserved2b[1];
+ u16 reserved2[3];
u8 epinfo;
u8 raminfo;
u8 linkinfo;
@@ -181,6 +184,10 @@ struct musb_regs {
#define MUSB_DEVCTL_HR 0x02
#define MUSB_DEVCTL_SESSION 0x01
+/* ULPI VBUSCONTROL */
+#define ULPI_USE_EXTVBUS 0x01
+#define ULPI_USE_EXTVBUSIND 0x02
+
/* TESTMODE */
#define MUSB_TEST_FORCE_HOST 0x80
#define MUSB_TEST_FIFO_ACCESS 0x40
@@ -341,6 +348,7 @@ struct musb_config {
struct musb_regs *regs;
u32 timeout;
u8 musb_speed;
+ u8 extvbus;
};
/* externally defined data */
@@ -361,6 +369,24 @@ extern void read_fifo(u8 ep, u32 length, void *fifo_data);
# define readb(addr) (u8)bfin_read16(addr)
# undef writeb
# define writeb(b, addr) bfin_write16(addr, b)
+/*
+ * The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY.
+ * However, it has no ULPI support - so there are no registers at all.
+ * That means accesses to ULPI_BUSCONTROL have to be abstracted away.
+ */
+static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
+{}
+static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
+{}
+#else
+static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
+{
+ return readb(&musbr->ulpi_busctl);
+}
+static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
+{
+ writeb(val, &musbr->ulpi_busctl);
+}
#endif
#endif /* __MUSB_HDRC_DEFS_H__ */
--
1.6.2.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/4 v2] omap3evm: Add board revision function
2010-06-09 10:45 ` [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus Ajay Kumar Gupta
@ 2010-06-09 10:45 ` Ajay Kumar Gupta
2010-06-09 10:45 ` [U-Boot] [PATCH 4/4] musb: Program extvbus for OMAP3EVM Rev >= E Ajay Kumar Gupta
2010-06-09 23:05 ` [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus Mike Frysinger
1 sibling, 1 reply; 6+ messages in thread
From: Ajay Kumar Gupta @ 2010-06-09 10:45 UTC (permalink / raw)
To: u-boot
Added function to differentiate between the OMAP3EVM revisions. The
chip-id of the ethernet PHY is being used for this purpose.
Rev A to D : 0x01150000
Rev >= E : 0x92200000
CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
---
Changes from v1:
- Fixed the signed-off-by: mail ids
board/ti/evm/evm.c | 30 ++++++++++++++++++++++++++++++
board/ti/evm/evm.h | 14 ++++++++++++++
2 files changed, 44 insertions(+), 0 deletions(-)
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 0718a08..fcc1803 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -37,6 +37,33 @@
#include <asm/mach-types.h>
#include "evm.h"
+static u8 omap3_evm_version;
+
+u8 get_omap3_evm_rev(void)
+{
+ return omap3_evm_version;
+}
+
+static void omap3_evm_get_revision(void)
+{
+ unsigned int smsc_id;
+
+ /* Ethernet PHY ID is stored at ID_REV register */
+ smsc_id = readl(CONFIG_SMC911X_BASE + 0x50) & 0xFFFF0000;
+ printf("Read back SMSC id 0x%x\n", smsc_id);
+
+ switch (smsc_id) {
+ /* SMSC9115 chipset */
+ case 0x01150000:
+ omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
+ break;
+ /* SMSC 9220 chipset */
+ case 0x92200000:
+ default:
+ omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
+ }
+}
+
/*
* Routine: board_init
* Description: Early hardware init.
@@ -121,6 +148,9 @@ static void setup_net_chip(void)
writel(GPIO0, &gpio3_base->cleardataout);
udelay(1);
writel(GPIO0, &gpio3_base->setdataout);
+
+ /* determine omap3evm revision */
+ omap3_evm_get_revision();
}
int board_eth_init(bd_t *bis)
diff --git a/board/ti/evm/evm.h b/board/ti/evm/evm.h
index 37da29d..e2581f6 100644
--- a/board/ti/evm/evm.h
+++ b/board/ti/evm/evm.h
@@ -33,6 +33,20 @@ const omap3_sysinfo sysinfo = {
#endif
};
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ * GEN_1 = 0x01150000
+ * GEN_2 = 0x92200000
+ */
+enum {
+ OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
+ OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
+};
+
+u8 get_omap3_evm_rev(void);
+
static void setup_net_chip(void);
/*
--
1.6.2.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 4/4] musb: Program extvbus for OMAP3EVM Rev >= E
2010-06-09 10:45 ` [U-Boot] [PATCH 3/4 v2] omap3evm: Add board revision function Ajay Kumar Gupta
@ 2010-06-09 10:45 ` Ajay Kumar Gupta
0 siblings, 0 replies; 6+ messages in thread
From: Ajay Kumar Gupta @ 2010-06-09 10:45 UTC (permalink / raw)
To: u-boot
OMAP3EVM Rev >=E uses external Vbus supply so setting 'extvbus'
to '1' for OMAP3EVM Rev >=E runtime based on EVM revision.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
---
board/ti/evm/evm.c | 13 +++++++++++++
drivers/usb/musb/omap3.c | 3 +++
drivers/usb/musb/omap3.h | 4 ++++
3 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index fcc1803..9948b9c 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -65,6 +65,19 @@ static void omap3_evm_get_revision(void)
}
/*
+ * MUSB port on OMAP3EVM Rev >= E requires extvbus programming.
+ */
+u8 omap3_evm_need_extvbus(void)
+{
+ u8 retval = 0;
+
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+ retval = 1;
+
+ return retval;
+}
+
+/*
* Routine: board_init
* Description: Early hardware init.
*/
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index 785629c..a983552 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -119,6 +119,9 @@ int musb_platform_init(void)
stdby &= ~OMAP3_OTG_FORCESTDBY_STANDBY;
writel(stdby, &otg->forcestdby);
+#ifdef CONFIG_OMAP3_EVM
+ musb_cfg.extvbus = omap3_evm_need_extvbus();
+#endif
platform_needs_initialization = 0;
}
diff --git a/drivers/usb/musb/omap3.h b/drivers/usb/musb/omap3.h
index b591862..c934e0c 100644
--- a/drivers/usb/musb/omap3.h
+++ b/drivers/usb/musb/omap3.h
@@ -44,4 +44,8 @@
int musb_platform_init(void);
+#ifdef CONFIG_OMAP3_EVM
+extern u8 omap3_evm_use_extvbus(void);
+#endif
+
#endif /* _MUSB_OMAP3_H */
--
1.6.2.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus
2010-06-09 10:45 ` [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus Ajay Kumar Gupta
2010-06-09 10:45 ` [U-Boot] [PATCH 3/4 v2] omap3evm: Add board revision function Ajay Kumar Gupta
@ 2010-06-09 23:05 ` Mike Frysinger
2010-06-10 5:46 ` Gupta, Ajay Kumar
1 sibling, 1 reply; 6+ messages in thread
From: Mike Frysinger @ 2010-06-09 23:05 UTC (permalink / raw)
To: u-boot
On Wednesday, June 09, 2010 06:45:32 Ajay Kumar Gupta wrote:
> +static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
> +{}
probably want this to return 0 to avoid warnings, otherwise this looks good to
me. thanks !
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100609/c36be938/attachment.pgp
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus
2010-06-09 23:05 ` [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus Mike Frysinger
@ 2010-06-10 5:46 ` Gupta, Ajay Kumar
0 siblings, 0 replies; 6+ messages in thread
From: Gupta, Ajay Kumar @ 2010-06-10 5:46 UTC (permalink / raw)
To: u-boot
> > +static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
> > +{}
>
> probably want this to return 0 to avoid warnings, otherwise this looks
> good to
> me. thanks !
Sure, I will update and repost the patches.
Thanks,
Ajay
> -mike
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-06-10 5:46 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-09 10:45 [U-Boot] [PATCH 1/4 v2] musb: Use name based initialization for musb_config Ajay Kumar Gupta
2010-06-09 10:45 ` [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus Ajay Kumar Gupta
2010-06-09 10:45 ` [U-Boot] [PATCH 3/4 v2] omap3evm: Add board revision function Ajay Kumar Gupta
2010-06-09 10:45 ` [U-Boot] [PATCH 4/4] musb: Program extvbus for OMAP3EVM Rev >= E Ajay Kumar Gupta
2010-06-09 23:05 ` [U-Boot] [PATCH 2/4 v2] musb: Add Phy programming for using external Vbus Mike Frysinger
2010-06-10 5:46 ` Gupta, Ajay Kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox