From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Frysinger Date: Thu, 10 Jun 2010 02:15:26 -0400 Subject: [U-Boot] [PATCH 2/4 v3] musb: Add Phy programming for using external Vbus In-Reply-To: <1276149050-12974-2-git-send-email-ajay.gupta@ti.com> References: <1276149050-12974-1-git-send-email-ajay.gupta@ti.com> <1276149050-12974-2-git-send-email-ajay.gupta@ti.com> Message-ID: <201006100215.28664.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thursday, June 10, 2010 01:50:48 Ajay Kumar Gupta wrote: > MUSB PHY on OMAP3EVM Rev >= E uses external Vbus supply to support > 500mA of power.We need to program MUSB PHY to use external Vbus > for this purpose. > > Adding 'extvbus' member in musb_config structure which should be set > by all the boards where MUSB interface is using external Vbus supply. > > Also added ULPI bus control register read/write abstraction for > Blackfin processor as it doesn't have ULPI registers. doesnt seem to cause problems with bf548-ezkit, so: Acked-by: Mike Frysinger -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20100610/e3059808/attachment.pgp