From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kyungmin Park Date: Sat, 12 Jun 2010 10:11:56 +0900 Subject: [U-Boot] [PATCH] UBI: initialise update marker Message-ID: <20100612011156.GA23405@july> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Peter Horton UBI: initialise update marker The in kernel copy of a volume's update marker is not initialised from the volume table. This means that volumes where an update was unfinnished will not be treated as "forbidden to use". This is basically that the update functionality was broken. Signed-off-by: Peter Horton Signed-off-by: Artem Bityutskiy Signed-off-by: Kyungmin Park --- diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 1afc61e..4004402 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -566,6 +566,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si, vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs); vol->alignment = be32_to_cpu(vtbl[i].alignment); vol->data_pad = be32_to_cpu(vtbl[i].data_pad); + vol->upd_marker = vtbl[i].upd_marker; vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME; vol->name_len = be16_to_cpu(vtbl[i].name_len);