* [U-Boot] Please pull u-boot-video/next
@ 2010-06-14 20:29 Anatolij Gustschin
2010-06-17 21:10 ` Wolfgang Denk
0 siblings, 1 reply; 10+ messages in thread
From: Anatolij Gustschin @ 2010-06-14 20:29 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
The following changes since commit a6862bc123a9e6c93583879973679b0c5941a418:
Wolfgang Denk (1):
Makefile/mkconfig: read simple board configurations from boards.cfg
are available in the git repository at:
git://git.denx.de/u-boot-video.git next
Anatolij Gustschin (3):
video: cfb_console: add weak default video_set_lut()
video: sm501: add support for SM501 chips on PCI bus
video: sm501.c: add weak default functions
arch/powerpc/cpu/mpc512x/diu.c | 14 ---
board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 9 --
drivers/video/cfb_console.c | 12 +++
drivers/video/sm501.c | 130 +++++++++++++++++++++----
include/pci_ids.h | 1 +
5 files changed, 125 insertions(+), 41 deletions(-)
Best regards,
Anatolij
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
2010-06-14 20:29 [U-Boot] Please pull u-boot-video/next Anatolij Gustschin
@ 2010-06-17 21:10 ` Wolfgang Denk
0 siblings, 0 replies; 10+ messages in thread
From: Wolfgang Denk @ 2010-06-17 21:10 UTC (permalink / raw)
To: u-boot
Dear Anatolij Gustschin,
In message <20100614222902.6e23fdc0@wker> you wrote:
> Dear Wolfgang,
>
> The following changes since commit a6862bc123a9e6c93583879973679b0c5941a418:
> Wolfgang Denk (1):
> Makefile/mkconfig: read simple board configurations from boards.cfg
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-video.git next
>
> Anatolij Gustschin (3):
> video: cfb_console: add weak default video_set_lut()
> video: sm501: add support for SM501 chips on PCI bus
> video: sm501.c: add weak default functions
>
> arch/powerpc/cpu/mpc512x/diu.c | 14 ---
> board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 9 --
> drivers/video/cfb_console.c | 12 +++
> drivers/video/sm501.c | 130 +++++++++++++++++++++----
> include/pci_ids.h | 1 +
> 5 files changed, 125 insertions(+), 41 deletions(-)
Applied to "next" branch, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Plan to throw one away. You will anyway."
- Fred Brooks, "The Mythical Man Month"
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
@ 2010-09-21 22:47 Anatolij Gustschin
2010-09-22 20:49 ` Wolfgang Denk
0 siblings, 1 reply; 10+ messages in thread
From: Anatolij Gustschin @ 2010-09-21 22:47 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
The following changes since commit d70d8ccc200db8c16a6654cb726c3d74b6640b32:
Kim Phillips (1):
silence config step commands display during MAKEALL builds
are available in the git repository at:
git://git.denx.de/u-boot-video.git next
Timur Tabi (3):
logos: add Freescale logo
video: cfb_console: add support for 4bpp bitmaps with GDF_32BIT_X888RGB
fsl: refactor MPC8610 and MPC5121 DIU code to use existing bitmap and logo features
arch/powerpc/cpu/mpc512x/Makefile | 1 -
arch/powerpc/cpu/mpc512x/diu.c | 68 +--
board/freescale/common/Makefile | 2 +-
board/freescale/common/fsl_diu_fb.c | 132 +----
board/freescale/common/fsl_diu_fb.h | 12 +-
board/freescale/common/fsl_logo_bmp.c | 878 -------------------------
board/freescale/mpc5121ads/mpc5121ads.c | 5 -
board/freescale/mpc8610hpcd/mpc8610hpcd.c | 6 +-
board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 78 +--
drivers/video/cfb_console.c | 38 +-
include/configs/MPC8610HPCD.h | 5 +-
include/configs/mpc5121ads.h | 6 +-
tools/Makefile | 3 +
tools/logos/freescale.bmp | Bin 0 -> 46738 bytes
14 files changed, 77 insertions(+), 1157 deletions(-)
delete mode 100644 board/freescale/common/fsl_logo_bmp.c
create mode 100644 tools/logos/freescale.bmp
Thanks,
Anatolij
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
2010-09-21 22:47 Anatolij Gustschin
@ 2010-09-22 20:49 ` Wolfgang Denk
0 siblings, 0 replies; 10+ messages in thread
From: Wolfgang Denk @ 2010-09-22 20:49 UTC (permalink / raw)
To: u-boot
Dear Anatolij Gustschin,
In message <20100922004749.60ec51ae@wker> you wrote:
> Dear Wolfgang,
>
> The following changes since commit d70d8ccc200db8c16a6654cb726c3d74b6640b32:
> Kim Phillips (1):
> silence config step commands display during MAKEALL builds
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-video.git next
>
> Timur Tabi (3):
> logos: add Freescale logo
> video: cfb_console: add support for 4bpp bitmaps with GDF_32BIT_X888RGB
> fsl: refactor MPC8610 and MPC5121 DIU code to use existing bitmap and logo features
>
> arch/powerpc/cpu/mpc512x/Makefile | 1 -
> arch/powerpc/cpu/mpc512x/diu.c | 68 +--
> board/freescale/common/Makefile | 2 +-
> board/freescale/common/fsl_diu_fb.c | 132 +----
> board/freescale/common/fsl_diu_fb.h | 12 +-
> board/freescale/common/fsl_logo_bmp.c | 878 -------------------------
> board/freescale/mpc5121ads/mpc5121ads.c | 5 -
> board/freescale/mpc8610hpcd/mpc8610hpcd.c | 6 +-
> board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 78 +--
> drivers/video/cfb_console.c | 38 +-
> include/configs/MPC8610HPCD.h | 5 +-
> include/configs/mpc5121ads.h | 6 +-
> tools/Makefile | 3 +
> tools/logos/freescale.bmp | Bin 0 -> 46738 bytes
> 14 files changed, 77 insertions(+), 1157 deletions(-)
> delete mode 100644 board/freescale/common/fsl_logo_bmp.c
> create mode 100644 tools/logos/freescale.bmp
Applied to "next", thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You Don't Have To Be 'Damned' To Work Here, But It Helps!!!
- Terry Pratchett, _Eric_
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
@ 2010-09-27 19:24 Anatolij Gustschin
2010-10-05 12:32 ` Wolfgang Denk
0 siblings, 1 reply; 10+ messages in thread
From: Anatolij Gustschin @ 2010-09-27 19:24 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
The following changes since commit 6aa3d3bfaa986f1aff5e21a9b9f68d087715b1a9:
Peter Tyser (1):
83xx: Remove warmboot parameter from PCI init functions
are available in the git repository at:
git://git.denx.de/u-boot-video.git next
Alexander Stein (1):
atmel_lcd: Allow contrast polarity to be either positive or negative
Anatolij Gustschin (1):
fsl_diu_fb: further refactoring of FSL DIU code
Timur Tabi (2):
p1022ds: add video support
p1022ds: use weak CFI flash accessors when DIU is enabled
arch/powerpc/cpu/mpc512x/diu.c | 62 +----
board/davedenx/aria/aria.c | 5 -
board/freescale/common/fsl_diu_fb.c | 41 +++-
board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 74 +-----
board/freescale/p1022ds/Makefile | 2 +
board/freescale/p1022ds/diu.c | 304 ++++++++++++++++++++++
board/pdm360ng/pdm360ng.c | 3 -
drivers/video/atmel_lcdfb.c | 3 +-
include/configs/P1022DS.h | 19 +-
{board/freescale/common => include}/fsl_diu_fb.h | 1 +
include/lcd.h | 1 +
11 files changed, 382 insertions(+), 133 deletions(-)
create mode 100644 board/freescale/p1022ds/diu.c
rename {board/freescale/common => include}/fsl_diu_fb.h (97%)
Thanks,
Anatolij
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
2010-09-27 19:24 Anatolij Gustschin
@ 2010-10-05 12:32 ` Wolfgang Denk
0 siblings, 0 replies; 10+ messages in thread
From: Wolfgang Denk @ 2010-10-05 12:32 UTC (permalink / raw)
To: u-boot
Dear Anatolij Gustschin,
In message <20100927212457.4051aa0e@wker> you wrote:
> Dear Wolfgang,
>
> The following changes since commit 6aa3d3bfaa986f1aff5e21a9b9f68d087715b1a9:
> Peter Tyser (1):
> 83xx: Remove warmboot parameter from PCI init functions
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-video.git next
>
> Alexander Stein (1):
> atmel_lcd: Allow contrast polarity to be either positive or negative
>
> Anatolij Gustschin (1):
> fsl_diu_fb: further refactoring of FSL DIU code
>
> Timur Tabi (2):
> p1022ds: add video support
> p1022ds: use weak CFI flash accessors when DIU is enabled
>
> arch/powerpc/cpu/mpc512x/diu.c | 62 +----
> board/davedenx/aria/aria.c | 5 -
> board/freescale/common/fsl_diu_fb.c | 41 +++-
> board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 74 +-----
> board/freescale/p1022ds/Makefile | 2 +
> board/freescale/p1022ds/diu.c | 304 ++++++++++++++++++++++
> board/pdm360ng/pdm360ng.c | 3 -
> drivers/video/atmel_lcdfb.c | 3 +-
> include/configs/P1022DS.h | 19 +-
> {board/freescale/common => include}/fsl_diu_fb.h | 1 +
> include/lcd.h | 1 +
> 11 files changed, 382 insertions(+), 133 deletions(-)
> create mode 100644 board/freescale/p1022ds/diu.c
> rename {board/freescale/common => include}/fsl_diu_fb.h (97%)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is an old custom among my people. When a woman saves a man's
life, he is grateful.
-- Nona, the Kanuto which woman, "A Private Little War",
stardate 4211.8.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
@ 2017-09-15 13:12 Anatolij Gustschin
2017-09-22 14:18 ` Tom Rini
0 siblings, 1 reply; 10+ messages in thread
From: Anatolij Gustschin @ 2017-09-15 13:12 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull some new video patches. The full build passed:
https://travis-ci.org/vdsao/u-boot-video/builds/275799369
The following changes since commit c98ac3487e413c71e5d36322ef3324b21c6f60f9:
Prepare v2017.09 (2017-09-11 14:10:40 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-video.git next
for you to fetch changes up to 8ef05352508f99b9e69feeca17a49671cc3d0ccf:
video: add config option to skip framebuffer clear (2017-09-12 13:40:47 +0200)
----------------------------------------------------------------
Patrick Delaunay (2):
dm: backlight: Add CONFIG_BACKLIGHT_PWM
dm: backlight: Add a driver for GPIO backlight
Philippe CORNU (1):
video: add STM32 LTDC display controller
Rob Clark (2):
video: simplefb
video: add config option to skip framebuffer clear
drivers/video/Kconfig | 41 ++++
drivers/video/Makefile | 8 +-
drivers/video/backlight_gpio.c | 74 +++++++
drivers/video/cfb_console.c | 3 +-
drivers/video/simplefb.c | 73 +++++++
drivers/video/stm32/Kconfig | 44 +++++
drivers/video/stm32/Makefile | 10 +
drivers/video/stm32/stm32_ltdc.c | 406 +++++++++++++++++++++++++++++++++++++++
drivers/video/video-uclass.c | 4 +-
9 files changed, 657 insertions(+), 6 deletions(-)
create mode 100644 drivers/video/backlight_gpio.c
create mode 100644 drivers/video/simplefb.c
create mode 100644 drivers/video/stm32/Kconfig
create mode 100644 drivers/video/stm32/Makefile
create mode 100644 drivers/video/stm32/stm32_ltdc.c
Thanks,
Anatolij
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
2017-09-15 13:12 Anatolij Gustschin
@ 2017-09-22 14:18 ` Tom Rini
0 siblings, 0 replies; 10+ messages in thread
From: Tom Rini @ 2017-09-22 14:18 UTC (permalink / raw)
To: u-boot
On Fri, Sep 15, 2017 at 03:12:28PM +0200, Anatolij Gustschin wrote:
> Hi Tom,
>
> please pull some new video patches. The full build passed:
>
> https://travis-ci.org/vdsao/u-boot-video/builds/275799369
>
> The following changes since commit c98ac3487e413c71e5d36322ef3324b21c6f60f9:
>
> Prepare v2017.09 (2017-09-11 14:10:40 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-video.git next
>
> for you to fetch changes up to 8ef05352508f99b9e69feeca17a49671cc3d0ccf:
>
> video: add config option to skip framebuffer clear (2017-09-12 13:40:47 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170922/608146dd/attachment.sig>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
@ 2018-03-13 21:31 Anatolij Gustschin
2018-03-14 1:30 ` Tom Rini
0 siblings, 1 reply; 10+ messages in thread
From: Anatolij Gustschin @ 2018-03-13 21:31 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit 5e62f828256d66e2b28def4f9ef20a2a05c2d04f:
Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-video.git next
for you to fetch changes up to d06717f853cd98a6a4536e5de5248e6c99a2b7bc:
sunxi: video: mark framebuffer as EFI reserved memory (2018-03-09 18:24:49 +0100)
----------------------------------------------------------------
Heinrich Schuchardt (6):
dm: video: show correct colors in graphical console
dm: video: correctly clean background in 16bit mode
dm: video: use constants to refer to colors
dm: video: support increased intensity (bold)
video: indicate code page of bitmap fonts
sunxi: video: mark framebuffer as EFI reserved memory
Kever Yang (1):
pwm-backlight: make power-supply as option
drivers/video/pwm_backlight.c | 24 +++++-----
drivers/video/sunxi/sunxi_display.c | 8 ++++
drivers/video/vidconsole-uclass.c | 88 ++++++++++++++++++++++++-------------
drivers/video/video-uclass.c | 38 ++++++++++++----
include/video.h | 13 +++++-
include/video_console.h | 43 ++++++++++++++++++
include/video_font_4x6.h | 4 +-
include/video_font_data.h | 2 +
test/dm/video.c | 2 +-
9 files changed, 167 insertions(+), 55 deletions(-)
Please pull. Thanks!
Anatolij
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] Please pull u-boot-video/next
2018-03-13 21:31 Anatolij Gustschin
@ 2018-03-14 1:30 ` Tom Rini
0 siblings, 0 replies; 10+ messages in thread
From: Tom Rini @ 2018-03-14 1:30 UTC (permalink / raw)
To: u-boot
On Tue, Mar 13, 2018 at 10:31:58PM +0100, Anatolij Gustschin wrote:
> Hi Tom,
>
> The following changes since commit 5e62f828256d66e2b28def4f9ef20a2a05c2d04f:
>
> Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-video.git next
>
> for you to fetch changes up to d06717f853cd98a6a4536e5de5248e6c99a2b7bc:
>
> sunxi: video: mark framebuffer as EFI reserved memory (2018-03-09 18:24:49 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180313/cbcb1da8/attachment.sig>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-03-14 1:30 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-14 20:29 [U-Boot] Please pull u-boot-video/next Anatolij Gustschin
2010-06-17 21:10 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2010-09-21 22:47 Anatolij Gustschin
2010-09-22 20:49 ` Wolfgang Denk
2010-09-27 19:24 Anatolij Gustschin
2010-10-05 12:32 ` Wolfgang Denk
2017-09-15 13:12 Anatolij Gustschin
2017-09-22 14:18 ` Tom Rini
2018-03-13 21:31 Anatolij Gustschin
2018-03-14 1:30 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox