From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-mpc85xx [updated]
Date: Fri, 16 Jul 2010 23:20:36 +0200 [thread overview]
Message-ID: <20100716212036.969F4153A7F@gemini.denx.de> (raw)
In-Reply-To: <Pine.LNX.4.64.1007161416310.22621@localhost.localdomain>
Dear Kumar Gala,
In message <Pine.LNX.4.64.1007161416310.22621@localhost.localdomain> you wrote:
> [try and get this right this time, actually drop the p4080 immap changes]
>
> The following changes since commit d6f324d03d7829a1da1dee8b60f91b173a3976f0:
> Wolfgang Denk (1):
> Merge branch 'next' of git://git.denx.de/u-boot-nios
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx master
>
> Becky Bruce (8):
> powerpc: Update configs to properly set FSL_ELBC
> 83xx/85xx/86xx: LBC register cleanup
> mpc85xx: tlb.c cleanups
> mpc85xx: Add print_tlbcam() function
> drivers/misc/fsl_law.c: Rearrange code to avoid duplication
> fsl_law.c: Add print_laws() for FSL_CORENET platforms.
> mpc85xx: Add reginfo command
> powerpc 83xx/85xx: Merge lbc upmconfig code
>
> Kim Phillips (3):
> fdt: move fsl specific code from common fdt area to mpc8xxx/fdt.c
> powerpc/8xxx: Distinguish between incompatible SEC h/w types
> powerpc/8xxx: Add base support for the SEC4
>
> Kumar Gala (10):
> mpc8xxx: Remove cpu-handles for cpus we delete
> powerpc/8xxx: Add is_core_disabled to remove disabled cores from dtb
> ppc/85xx: Add a structure defn for PIXIS registers
> Move ICS CLK chip frequency calculation code into a common board library
> powerpc/85xx: Add recognition of e5500 core
> powerpc/85xx: Add support for link stack & STAC on e5500
> powerpc/85xx: Add command to report errata workarounds
> ppc/85xx: Convert MPC8572DS to using board common ICS307 code
> ppc/85xx: Convert MPC8536DS to using board common ICS307 code
> powerpc/85xx: Move p1022ds slot code into board file
>
> Poonam Aggrwal (2):
> 85xx/p1_p2_rdb: enable hwconfig
> 85xx/p1_p2_rdb: PCIe E1000 card support added.
>
> Timur Tabi (2):
> fsl: add LAW target to fsl_pci_info structure
> powerpc: add support for the Freescale P1022DS reference board
>
> MAINTAINERS | 1 +
> MAKEALL | 1 +
> Makefile | 1 +
> arch/powerpc/cpu/mpc83xx/cpu.c | 66 ----
> arch/powerpc/cpu/mpc83xx/cpu_init.c | 53 +---
> arch/powerpc/cpu/mpc83xx/nand_init.c | 4 +-
> arch/powerpc/cpu/mpc83xx/speed.c | 2 +-
> arch/powerpc/cpu/mpc85xx/Makefile | 2 +
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 51 +++
> arch/powerpc/cpu/mpc85xx/cpu.c | 106 ++----
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 58 +---
> arch/powerpc/cpu/mpc85xx/cpu_init_nand.c | 6 +-
> arch/powerpc/cpu/mpc85xx/fdt.c | 4 +-
> arch/powerpc/cpu/mpc85xx/mp.c | 23 ++
> arch/powerpc/cpu/mpc85xx/p1022_serdes.c | 98 +++++
> arch/powerpc/cpu/mpc85xx/speed.c | 5 +-
> arch/powerpc/cpu/mpc85xx/tlb.c | 70 +++--
> arch/powerpc/cpu/mpc86xx/cpu.c | 15 +-
> arch/powerpc/cpu/mpc86xx/cpu_init.c | 55 +---
> arch/powerpc/cpu/mpc86xx/fdt.c | 5 +-
> arch/powerpc/cpu/mpc86xx/mp.c | 17 +
> arch/powerpc/cpu/mpc86xx/speed.c | 5 +-
> arch/powerpc/cpu/mpc8xxx/Makefile | 8 +-
> arch/powerpc/cpu/mpc8xxx/fdt.c | 178 +++++++++-
> arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 134 +++++++
> arch/powerpc/include/asm/config.h | 15 +
> arch/powerpc/include/asm/fsl_law.h | 1 +
> arch/powerpc/include/asm/fsl_lbc.h | 112 ++++---
> arch/powerpc/include/asm/fsl_pci.h | 19 +-
> arch/powerpc/include/asm/immap_83xx.h | 13 +-
> arch/powerpc/include/asm/immap_85xx.h | 84 ++---
> arch/powerpc/include/asm/immap_86xx.h | 49 +---
> arch/powerpc/include/asm/mmu.h | 2 +
> arch/powerpc/include/asm/mp.h | 3 +-
> arch/powerpc/include/asm/processor.h | 4 +-
> board/atum8548/atum8548.c | 2 +-
> board/esd/vme8349/vme8349.c | 2 +-
> board/freescale/common/Makefile | 4 +
> board/freescale/common/ics307_clk.c | 88 +++++
> board/freescale/common/ics307_clk.h | 30 ++
> board/freescale/common/ngpixis.h | 2 +-
> board/freescale/common/pixis.h | 182 +++++++++
> board/freescale/mpc8313erdb/sdram.c | 2 +-
> board/freescale/mpc8349emds/mpc8349emds.c | 2 +-
> board/freescale/mpc8349itx/mpc8349itx.c | 7 +-
> board/freescale/mpc8360emds/mpc8360emds.c | 6 +-
> board/freescale/mpc8360erdk/nand.c | 6 +-
> board/freescale/mpc8536ds/mpc8536ds.c | 148 --------
> board/freescale/mpc8540ads/mpc8540ads.c | 8 +-
> board/freescale/mpc8541cds/mpc8541cds.c | 13 +-
> board/freescale/mpc8544ds/mpc8544ds.c | 2 +-
> board/freescale/mpc8548cds/mpc8548cds.c | 13 +-
> board/freescale/mpc8555cds/mpc8555cds.c | 12 +-
> board/freescale/mpc8560ads/mpc8560ads.c | 8 +-
> board/freescale/mpc8568mds/mpc8568mds.c | 11 +-
> board/freescale/mpc8569mds/mpc8569mds.c | 2 +-
> board/freescale/mpc8572ds/mpc8572ds.c | 145 +--------
> board/freescale/p1022ds/Makefile | 39 ++
> board/freescale/p1022ds/config.mk | 14 +
> board/freescale/p1022ds/ddr.c | 106 ++++++
> board/freescale/p1022ds/law.c | 21 +
> board/freescale/p1022ds/p1022ds.c | 354 ++++++++++++++++++
> board/freescale/p1022ds/tlb.c | 76 ++++
> board/freescale/p2020ds/p2020ds.c | 149 --------
> board/mpc8540eval/mpc8540eval.c | 6 +-
> board/pm854/pm854.c | 2 +-
> board/pm856/pm856.c | 2 +-
> board/sbc8349/sbc8349.c | 2 +-
> board/sbc8548/sbc8548.c | 20 +-
> board/sbc8560/sbc8560.c | 6 +-
> board/sheldon/simpc8313/sdram.c | 2 +-
> board/sheldon/simpc8313/simpc8313.c | 2 +-
> board/socrates/socrates.c | 31 +-
> board/tqc/tqm834x/tqm834x.c | 8 +-
> board/tqc/tqm85xx/nand.c | 12 +-
> board/tqc/tqm85xx/tqm85xx.c | 35 +-
> board/xes/xpedite5170/xpedite5170.c | 10 +-
> board/xes/xpedite5200/xpedite5200.c | 11 +-
> board/xes/xpedite5370/xpedite5370.c | 9 +-
> boards.cfg | 1 +
> common/cmd_reginfo.c | 5 +
> common/fdt_support.c | 129 -------
> drivers/misc/fsl_law.c | 131 +++----
> drivers/mtd/nand/fsl_elbc_nand.c | 18 +-
> include/configs/MPC8313ERDB.h | 1 +
> include/configs/MPC8315ERDB.h | 1 +
> include/configs/MPC837XEMDS.h | 1 +
> include/configs/MPC837XERDB.h | 1 +
> include/configs/MPC8536DS.h | 15 +-
> include/configs/MPC8540EVAL.h | 1 +
> include/configs/MPC8541CDS.h | 1 +
> include/configs/MPC8544DS.h | 1 +
> include/configs/MPC8548CDS.h | 1 +
> include/configs/MPC8555CDS.h | 1 +
> include/configs/MPC8560ADS.h | 1 +
> include/configs/MPC8568MDS.h | 1 +
> include/configs/MPC8569MDS.h | 1 +
> include/configs/MPC8572DS.h | 15 +-
> include/configs/P1022DS.h | 470 ++++++++++++++++++++++++
> include/configs/P1_P2_RDB.h | 4 +
> include/configs/P2020DS.h | 17 +-
> include/configs/PM854.h | 1 +
> include/configs/PM856.h | 1 +
> include/configs/SBC8540.h | 1 +
> include/configs/SIMPC8313.h | 1 +
> include/configs/TQM85xx.h | 1 +
> include/configs/XPEDITE5200.h | 1 +
> include/configs/XPEDITE5370.h | 2 +
> include/configs/sbc8548.h | 1 +
> include/configs/sbc8560.h | 1 +
> include/configs/socrates.h | 1 +
> include/configs/stxgp3.h | 1 +
> include/configs/stxssa.h | 1 +
> include/fdt_support.h | 2 +-
> include/mpc85xx.h | 2 -
> nand_spl/board/freescale/mpc8536ds/nand_boot.c | 5 +-
> nand_spl/nand_boot_fsl_elbc.c | 4 +-
> 117 files changed, 2370 insertions(+), 1355 deletions(-)
> create mode 100644 arch/powerpc/cpu/mpc85xx/cmd_errata.c
> create mode 100644 arch/powerpc/cpu/mpc85xx/p1022_serdes.c
> create mode 100644 arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
> create mode 100644 board/freescale/common/ics307_clk.c
> create mode 100644 board/freescale/common/ics307_clk.h
> create mode 100644 board/freescale/common/pixis.h
> create mode 100644 board/freescale/p1022ds/Makefile
> create mode 100644 board/freescale/p1022ds/config.mk
> create mode 100644 board/freescale/p1022ds/ddr.c
> create mode 100644 board/freescale/p1022ds/law.c
> create mode 100644 board/freescale/p1022ds/p1022ds.c
> create mode 100644 board/freescale/p1022ds/tlb.c
> create mode 100644 include/configs/P1022DS.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The Wright Bothers weren't the first to fly. They were just the first
not to crash.
next prev parent reply other threads:[~2010-07-16 21:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-08 14:26 [U-Boot] Please pull u-boot-mpc85xx Kumar Gala
2010-07-14 19:42 ` Wolfgang Denk
2010-07-16 15:57 ` [U-Boot] Please pull u-boot-mpc85xx [updated] Kumar Gala
2010-07-16 19:16 ` Kumar Gala
2010-07-16 21:20 ` Wolfgang Denk [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-07-29 13:05 [U-Boot] [GIT pull] Please pull u-boot-mpc85xx Kumar Gala
2011-07-29 14:09 ` [U-Boot] Please pull u-boot-mpc85xx (updated) Kumar Gala
2011-07-29 20:05 ` Wolfgang Denk
2011-07-29 21:07 ` Kumar Gala
2009-09-24 17:07 Kumar Gala
2009-09-24 21:40 ` Wolfgang Denk
2009-09-24 22:32 ` Paul Gortmaker
2009-07-22 16:11 Kumar Gala
2009-07-22 22:58 ` Wolfgang Denk
2009-07-24 20:58 ` Timur Tabi
2009-07-24 20:59 ` Kumar Gala
2009-07-27 2:09 ` Zang Roy-R61911
2009-07-24 20:59 ` Ben Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100716212036.969F4153A7F@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox