From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.
Date: Tue, 20 Jul 2010 23:43:14 +0200 [thread overview]
Message-ID: <20100720214314.EA333153A7F@gemini.denx.de> (raw)
In-Reply-To: <20100720160808.b7ecf34c.kim.phillips@freescale.com>
Dear Kim,
In message <20100720160808.b7ecf34c.kim.phillips@freescale.com> you wrote:
>
> > However, I cannot see any gentenv() use before relocation for your
> > board, so the problem there is still unclear. I think I need your
> > help to debug this...
>
> looks like arch/powerpc/cpu/mpc8xxx/ddr/options.c gets memory
> interleaving configuration from the environment, using getenv().
Ah! Can you please try the following patch - it's not intended to be a
fix, just to verify my hypothesis. Thanks in advance.
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index 46731c8..0b9cb1d 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -24,6 +24,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
{
unsigned int i;
const char *p;
+ char tmp[64];
/* Chip select options. */
@@ -221,7 +222,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
* should be a subset of the requested configuration.
*/
#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- if ((p = getenv("memctl_intlv_ctl")) != NULL) {
+ i = getenv_r("memctl_intlv_ctl", tmp, sizeof (tmp));
+ if (i > 0) {
if (pdimm[0].n_ranks == 0) {
printf("There is no rank on CS0. Because only rank on "
"CS0 and ranks chip-select interleaved with CS0"
@@ -230,37 +232,38 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
popts->memctl_interleaving = 0;
} else {
popts->memctl_interleaving = 1;
- if (strcmp(p, "cacheline") == 0)
+ if (strcmp(tmp, "cacheline") == 0)
popts->memctl_interleaving_mode =
FSL_DDR_CACHE_LINE_INTERLEAVING;
- else if (strcmp(p, "page") == 0)
+ else if (strcmp(tmp, "page") == 0)
popts->memctl_interleaving_mode =
FSL_DDR_PAGE_INTERLEAVING;
- else if (strcmp(p, "bank") == 0)
+ else if (strcmp(tmp, "bank") == 0)
popts->memctl_interleaving_mode =
FSL_DDR_BANK_INTERLEAVING;
- else if (strcmp(p, "superbank") == 0)
+ else if (strcmp(tmp, "superbank") == 0)
popts->memctl_interleaving_mode =
FSL_DDR_SUPERBANK_INTERLEAVING;
else
popts->memctl_interleaving_mode =
- simple_strtoul(p, NULL, 0);
+ simple_strtoul(tmp, NULL, 0);
}
}
#endif
- if( ((p = getenv("ba_intlv_ctl")) != NULL) &&
+ i = getenv_r("ba_intlv_ctl", tmp, sizeof (tmp));
+ if (i > 0) && (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
(CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
- if (strcmp(p, "cs0_cs1") == 0)
+ if (strcmp(tmp, "cs0_cs1") == 0)
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
- else if (strcmp(p, "cs2_cs3") == 0)
+ else if (strcmp(tmp, "cs2_cs3") == 0)
popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
- else if (strcmp(p, "cs0_cs1_and_cs2_cs3") == 0)
+ else if (strcmp(tmp, "cs0_cs1_and_cs2_cs3") == 0)
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
- else if (strcmp(p, "cs0_cs1_cs2_cs3") == 0)
+ else if (strcmp(tmp, "cs0_cs1_cs2_cs3") == 0)
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
else
- popts->ba_intlv_ctl = simple_strtoul(p, NULL, 0);
+ popts->ba_intlv_ctl = simple_strtoul(tmp, NULL, 0);
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"In Christianity neither morality nor religion come into contact with
reality at any point." - Friedrich Nietzsche
next prev parent reply other threads:[~2010-07-20 21:43 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-17 19:45 [U-Boot] [PATCH 0/5] New environment code Wolfgang Denk
2010-07-17 19:45 ` [U-Boot] [PATCH 1/5] Add basic errno support Wolfgang Denk
2010-07-17 21:17 ` Mike Frysinger
2010-07-17 21:34 ` Wolfgang Denk
2010-07-18 12:51 ` Jerry Van Baren
2010-07-18 13:03 ` Wolfgang Denk
2010-09-12 19:16 ` Wolfgang Denk
2010-07-17 19:45 ` [U-Boot] [PATCH 2/5] Add qsort - add support for sorting data arrays Wolfgang Denk
2010-09-12 19:16 ` Wolfgang Denk
2010-07-17 19:45 ` [U-Boot] [PATCH 3/5] Add hash table support as base for new environment code Wolfgang Denk
2010-09-12 19:16 ` Wolfgang Denk
2010-12-08 9:44 ` Mike Frysinger
2010-12-08 10:02 ` Wolfgang Denk
2010-12-08 10:52 ` Mike Frysinger
2010-07-17 19:45 ` [U-Boot] [PATCH 4/5] Remove support for CONFIG_HAS_UID and "forceenv" command Wolfgang Denk
2010-07-17 22:12 ` Sergey Kubushyn
2010-09-12 19:18 ` Wolfgang Denk
2010-07-17 19:45 ` [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables Wolfgang Denk
2010-07-17 22:48 ` [U-Boot] [PATCH] new env: fix off-by-one error in setenv command Wolfgang Denk
2010-07-20 0:38 ` [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables Kim Phillips
2010-07-20 9:40 ` Wolfgang Denk
2010-07-20 18:36 ` Kim Phillips
2010-07-20 19:01 ` Wolfgang Denk
2010-07-20 20:09 ` Wolfgang Denk
[not found] ` <1279658019.5685.125.camel@thunk>
2010-07-20 20:35 ` Wolfgang Denk
2010-07-20 21:08 ` Kim Phillips
2010-07-20 21:43 ` Wolfgang Denk [this message]
2010-07-20 22:00 ` Kim Phillips
2010-07-25 21:45 ` Wolfgang Denk
2010-07-26 23:18 ` Kim Phillips
2010-07-20 19:11 ` Wolfgang Denk
2010-07-26 14:52 ` Matthias Fuchs
2010-07-28 21:17 ` Wolfgang Denk
2010-07-29 9:16 ` Matthias Fuchs
2010-08-03 22:48 ` Wolfgang Denk
2010-09-12 19:19 ` Wolfgang Denk
2010-12-30 1:53 ` [U-Boot] env_flash.c:saveenv() broken when env is smaller than a sector Mike Frysinger
2010-12-30 2:39 ` Mike Frysinger
2011-01-17 20:23 ` Wolfgang Denk
2010-07-17 19:49 ` [U-Boot] [PATCH 0/5] New environment code Wolfgang Denk
2010-07-17 20:56 ` Reinhard Meyer
2010-07-17 21:28 ` Mike Frysinger
2010-07-17 21:41 ` Wolfgang Denk
2010-07-18 2:18 ` Mike Frysinger
2010-07-17 21:31 ` Wolfgang Denk
2010-07-17 21:55 ` Wolfgang Denk
2010-07-18 5:32 ` Reinhard Meyer
2010-07-18 10:26 ` Wolfgang Denk
2010-10-20 8:08 ` Mike Frysinger
2010-10-20 8:19 ` Wolfgang Denk
2010-12-08 9:56 ` Mike Frysinger
2010-12-08 10:04 ` Wolfgang Denk
2010-12-08 10:19 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100720214314.EA333153A7F@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox