From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Frysinger Date: Mon, 26 Jul 2010 15:53:46 -0400 Subject: [U-Boot] drivers/net/enc28j60.c - generalisation, how? In-Reply-To: <201007251640.15189.vapier@gentoo.org> References: <4C4A8404.6030302@emk-elektronik.de> <4C4C9947.7050102@emk-elektronik.de> <201007251640.15189.vapier@gentoo.org> Message-ID: <201007261553.47271.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sunday, July 25, 2010 16:40:14 Mike Frysinger wrote: > On Sunday, July 25, 2010 16:06:31 Reinhard Meyer wrote: > > Mike Frysinger wrote: > > > On Saturday, July 24, 2010 02:11:16 Reinhard Meyer wrote: > > >> I would like to generalize that driver and make it also > > >> CONFIG_NET_MULTI-able. > > > > > > someone already has ... look at the archives in december of 09 > > > > Thanks for the hint Mike, > > it seems the thread there has died, and the work left incomplete however. > > But it gives a head start to complete it. > > The main issue I had is already proposed in that thread: rename the old > > driver and make a new one :) > > best to continue that work though rather than try and start your own from > scratch ... btw, i wasnt able to test the driver previously because it required a GPIO SPI CS which the Blackfin SPI driver did not previously support. but ive implemented & pushed that since, so i should be able to test the driver once you post it to make sure it does work across platforms (like Blackfin boards). -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20100726/87d04b1e/attachment.pgp