[U-Boot] [PATCH v3 3/4] mtdparts: add new sub-command "spread"

[Wolfgang Denk <wd@denx.de>]

Dear Ben Gardiner,

In message <1278366212-24023-4-git-send-email-bengardiner@nanometrics.ca> you wrote:
> This patch introduces the 'spread' sub-command of the mtdparts command.
> This command will modify the existing mtdparts variable by increasing
> the size of the partitions such that 1) each partition's net size is at
> least as large as the size specified in the mtdparts variable and 2)
> each partition starts on a good block.
> 
> The new subcommand is implemented by iterating over the mtd device
> partitions and collecting a bad blocks count in each -- including any
> trailing bad blocks -- and then modifying that partitions's part_info
> structure and checking if the modification affects the next partition.
> 
> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
> CC: Harald Welte <laforge@gnumonks.org>
> 
> ---
> 
> V2:
>  * formatting: spaces after 'if' and 'for'
>  * trailing whitespace removed
>  * check for null mtd->block_isbad before dereferencing
> 
> V3:
>  * rebased to 54841ab50c20d6fa6c9cc3eb826989da3a22d934 of
>    git://git.denx.de/u-boot.git
>  * fix more checkpatch errors
>  * update copyright statement of cmd_mtdparts.c to include openmoko's
>    copyright of the 'dynamic partitions' functionality using commit
>    e05835df019027391f58f9d8ce5e1257d6924798 of
>    git://git.openmoko.org/u-boot.git as reference.

NAK.  Please add this to the commit message, and add Harald's SoB
line instead.


> +#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
> +/** Increase the size of the given partition so that it's net size is at least
> + * as large as the size member and such that the next parition would start on a
> + * good blcok if it were adjacent to this partition
> + * @param mtd the mtd device
> + * @param part the partition
> + * @param next_offset pointer to the offset of the next partition after this
> + *                    partition's size has been modified (output)
> + */

Incorrect multiline comment style.

> +	for (i = part->offset;
> +	    i - bb_delta < part->offset + part->size;
> +	    i += mtd->erasesize) {
> +		if (mtd->block_isbad(mtd, i))
> +			bb_delta += mtd->erasesize;
> +	}

Indentation by TAB only, please.

> +	/* Absorb bad blocks immeadiately following this
> +	  * partition also into the partition, such that
> +	  * the next partition starts with a good block.
> +	  */

Incorrect multiline comment style.  More follow. Please fix globally.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"There was no difference between  the  behavior  of  a  god  and  the
operations of pure chance..."   - Thomas Pynchon, _Gravity's Rainbow_