From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sergei Poselenov <sposelenov@emcraft.com>
Date: Mon, 9 Aug 2010 16:01:42 +0400
Subject: [U-Boot] [PATCH 1/1] Fixed clobbered output of the "help usb"
	command
Message-ID: <20100809160142.076efd9c@emcraft.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello all,


I've noticed that the "usb help" doesn't format the output correctly:

=> help usb
usb - USB sub-system

Usage:
usb reset - reset (rescan) USB controller
usb stop [f]  - stop USB [f]=force stop
usb tree  - show USB device tree
usb info [dev] - show available USB devices
usb storage  - show details of USB storage devices
usb dev [dev] - show or set current USB storage device
usb part [dev] - print partition table of one or all USB storage devices
usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'
    to memory address `addr'usb write addr blk# cnt - write `cnt'
blocks starting at block `blk#' from memory address `addr'
=> 

With fix below applied, the output is correct:

=> help usb
usb - USB sub-system

Usage:
usb reset - reset (rescan) USB controller
usb stop [f]  - stop USB [f]=force stop
usb tree  - show USB device tree
usb info [dev] - show available USB devices
usb storage  - show details of USB storage devices
usb dev [dev] - show or set current USB storage device
usb part [dev] - print partition table of one or all USB storage devices
usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'
    to memory address `addr'
usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'
    from memory address `addr'
=> 


Please apply.

Regards,
Sergei