From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Tue, 17 Aug 2010 19:08:16 +0200
Subject: [U-Boot] [PATCHv4 CFI flash] Work around bug in Numonyx	P33/P30
	256-Mbit?65nm flash chips.
In-Reply-To: <20100817161807.GA11498@frolo.macqel>
References: <20100817094923.GA16006@frolo.macqel>
	<201008171757.00069.sr@denx.de>
	<20100817161807.GA11498@frolo.macqel>
Message-ID: <201008171908.16446.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tuesday 17 August 2010 18:18:07 Philippe De Muyter wrote:
> > unfortunately your patch base64 encoded. :-(
> 
> Are you sure ?  It isn't so in my `sent' folder.

Here from the header in my inbox:

Content-Type: text/plain;
   charset="utf-8"
Content-Transfer-Encoding: base64

<snip>
 
> > > diff -U 50 without-numonyx-workaround.log with-numonyx-workaround.log
> > > -U-Boot 2010.06-00696-g22b002c-dirty (Aug 16 2010 - 15:07:47)
> > > +U-Boot 2010.06-00696-g22b002c-dirty (Aug 16 2010 - 15:25:19)
> > 
> > You still have this "diff" stuff in the commit text. This results in the
> > remaining stuff being dropped by git after applying. Please remove those
> > diff lines.
> 
> Sorry about that; I had tested with `patch', but of course it does not
> need the commit text part :(
> 
> > And please don't send base64 encoded mails. I strongly suggest using
> > "git send-email".
> 
> My experience with `git send-email' is not that good (none of the mails I
> sent this way were answered), but I'll try again.

Did you find them on the list via a mailing archive?

Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de