From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] which protocol do I use to send S-record files when using the loads command ?
Date: Wed, 18 Aug 2010 19:32:10 +0200 [thread overview]
Message-ID: <20100818173210.4B550157D71@gemini.denx.de> (raw)
In-Reply-To: <226BC4AFA29FC24789DFD00DFF3084C2524247EDD2@SAFEMAIL.safetran.railad.com>
Dear "Mangelschots, Jef",
In message <226BC4AFA29FC24789DFD00DFF3084C2524247EDD2@SAFEMAIL.safetran.railad.com> you wrote:
> What file transfer protocol do I use when sending an S-record file when I issue the loads command ?
There is no protoco. You just send line by line...
> I tried with both TerraTerm and Hyperterminal.
Why did you not follow the description in the Manual?
> In both these cases, it reads the first line correctly, but by the time it wants to process the following line, it ends up reading garbage. It looks like the terminal programs kept sending bytes while U-boot was processing the first S-record line (which
> is an S0 record).
Yes. With other terminal emulation programs you may have to twiddle
with inter-character and especially inter-line timings.
> I also tried sending a file with the protocols Xmodem, Ymodem, Kermit.
loads is not supposed to support xmodem or ymodem or kermit (binary)
protocols.
For ymoden, please use the loady command.
For kermit binary protocol, please use the loadb command
(recommended: most stable and often fastest of the serial protocols).
> Any files attached to this e-mail will have been checked with virus detection software prior to transmission but you should carry out your own virus check before opening any attachment. Safetran Systems Corp does not accept liability for any damage or l
Omit this crap when posting to a public mailing list. If you cannot
switch that off, then use a different, neutral mail account for
posting to mailing lists.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The word "fit", as I understand it, means "appropriate to a purpose",
and I would say the body of the Dean is supremely appropriate to the
purpose of sitting around all day and eating big heavy meals.
- Terry Pratchett, _Moving Pictures_
next prev parent reply other threads:[~2010-08-18 17:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-28 17:50 [U-Boot] changes to U-boot and GPL Mangelschots, Jef
2010-05-28 20:26 ` Mike Frysinger
2010-05-28 21:04 ` Wolfgang Denk
2010-08-17 23:53 ` [U-Boot] loading S-record files Mangelschots, Jef
2010-08-18 17:11 ` [U-Boot] which protocol do I use to send S-record files when using the loads command ? Mangelschots, Jef
2010-08-18 17:09 ` Peter Barada
2010-08-18 17:38 ` Wolfgang Denk
2010-08-18 17:32 ` Wolfgang Denk [this message]
[not found] ` <226BC4AFA29FC24789DFD00DFF3084C2524247EE08@SAFEMAIL.safetran.railad.com>
2010-08-18 19:33 ` Wolfgang Denk
[not found] <226BC4AFA29FC24789DFD00DFF3084C2524247EECE@SAFEMAIL.safetran.railad.com>
2010-08-19 17:28 ` [U-Boot] FW: " Jef Mangelschots
2010-08-19 17:33 ` [U-Boot] " Jef Mangelschots
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100818173210.4B550157D71@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox