* [U-Boot] [PULL] U-Boot-pxa pull request
@ 2010-08-20 9:58 Marek Vasut
2010-09-07 21:17 ` Wolfgang Denk
0 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2010-08-20 9:58 UTC (permalink / raw)
To: u-boot
Hi, please pull my git://git.denx.de/u-boot-pxa for-wd-master branch into your -
master branch. Thanks
The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-08-18
21:16:35 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git for-wd-master
Marek Vasut (8):
PXA: pxafb: Add ACX517AKN support
common: Enable serial for PXA250
PXA: Palm Tungsten|C Support
PXA: pxafb: Add support for Sharp LQ038J7DH53
PXA: Add initial Palm LifeDrive support
PXA: Voipac270 improvements
PXA: Balloon3 board support
PXA: Add missing MAINTAINERS entries
MAINTAINERS | 9 ++
MAKEALL | 6 +-
Makefile | 7 +-
arch/arm/cpu/pxa/pxafb.c | 68 ++++++++++
board/balloon3/Makefile | 49 +++++++
board/balloon3/balloon3.c | 224 ++++++++++++++++++++++++++++++++
board/balloon3/config.mk | 1 +
board/balloon3/lowlevel_init.S | 36 ++++++
board/balloon3/u-boot.lds | 55 ++++++++
board/palmld/Makefile | 49 +++++++
board/palmld/config.mk | 1 +
board/palmld/lowlevel_init.S | 45 +++++++
board/palmld/palmld.c | 68 ++++++++++
board/palmld/u-boot.lds | 56 ++++++++
board/palmtc/Makefile | 49 +++++++
board/palmtc/config.mk | 1 +
board/palmtc/lowlevel_init.S | 39 ++++++
board/palmtc/palmtc.c | 58 +++++++++
board/palmtc/u-boot.lds | 56 ++++++++
board/vpac270/Makefile | 7 +-
board/vpac270/lowlevel_init.S | 1 -
board/vpac270/vpac270.c | 41 +++----
boards.cfg | 3 +
common/serial.c | 2 +-
include/configs/balloon3.h | 269 +++++++++++++++++++++++++++++++++++++++
include/configs/palmld.h | 273 ++++++++++++++++++++++++++++++++++++++++
include/configs/palmtc.h | 247 ++++++++++++++++++++++++++++++++++++
include/configs/vpac270.h | 106 +++++++++-------
28 files changed, 1746 insertions(+), 80 deletions(-)
create mode 100644 board/balloon3/Makefile
create mode 100644 board/balloon3/balloon3.c
create mode 100644 board/balloon3/config.mk
create mode 100644 board/balloon3/lowlevel_init.S
create mode 100644 board/balloon3/u-boot.lds
create mode 100644 board/palmld/Makefile
create mode 100644 board/palmld/config.mk
create mode 100644 board/palmld/lowlevel_init.S
create mode 100644 board/palmld/palmld.c
create mode 100644 board/palmld/u-boot.lds
create mode 100644 board/palmtc/Makefile
create mode 100644 board/palmtc/config.mk
create mode 100644 board/palmtc/lowlevel_init.S
create mode 100644 board/palmtc/palmtc.c
create mode 100644 board/palmtc/u-boot.lds
create mode 100644 include/configs/balloon3.h
create mode 100644 include/configs/palmld.h
create mode 100644 include/configs/palmtc.h
^ permalink raw reply [flat|nested] 11+ messages in thread* [U-Boot] [PULL] U-Boot-pxa pull request
2010-08-20 9:58 [U-Boot] [PULL] U-Boot-pxa pull request Marek Vasut
@ 2010-09-07 21:17 ` Wolfgang Denk
0 siblings, 0 replies; 11+ messages in thread
From: Wolfgang Denk @ 2010-09-07 21:17 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <201008201158.10826.marek.vasut@gmail.com> you wrote:
> Hi, please pull my git://git.denx.de/u-boot-pxa for-wd-master branch into your -
> master branch. Thanks
>
> The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
>
> Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-08-18
> 21:16:35 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-pxa.git for-wd-master
>
> Marek Vasut (8):
> PXA: pxafb: Add ACX517AKN support
You probably should have asked for Anatolij's ACK for this patch.
> common: Enable serial for PXA250
> PXA: Palm Tungsten|C Support
> PXA: pxafb: Add support for Sharp LQ038J7DH53
And for this one, too.
> PXA: Add initial Palm LifeDrive support
> PXA: Voipac270 improvements
I have some issues with this commit.
> PXA: Balloon3 board support
And with this one.
> PXA: Add missing MAINTAINERS entries
Waiting for feedback, not pulled.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
News is what a chap who doesn't care much about anything wants to
read. And it's only news until he's read it. After that it's dead.
- Evelyn Waugh _Scoop_ (1938) bk. 1, ch. 5
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PULL] U-Boot-pxa pull request
@ 2010-10-19 20:28 Marek Vasut
2010-10-19 20:41 ` Wolfgang Denk
2010-10-19 22:07 ` Wolfgang Denk
0 siblings, 2 replies; 11+ messages in thread
From: Marek Vasut @ 2010-10-19 20:28 UTC (permalink / raw)
To: u-boot
Hi,
please pull my git://git.denx.de/u-boot-pxa for-wd-testing branch into your u-
boot-testing/Makefile-cleanup branch. Thanks
The following changes since commit a5cb985d8006bd1bb6d188b84f435f5d007fd6ac:
Makefile: move all Power Architecture boards into boards.cfg (2010-10-17
01:34:08 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git for-wd-testing
Marek Vasut (19):
PXA: pxafb: Fix indent problems
PXA: pxa-regs.h cleanup
PXA: pxafb: Add ACX517AKN support
PXA: pxafb: Add support for Sharp LQ038J7DH53
PXA: pxafb: Marvell Littleton LCD definition
common: Enable serial for PXA250
PXA: Palm Tungsten|C Support
PXA: Add initial Palm LifeDrive support
PXA: Voipac270 improvements
PXA: Balloon3 board support
PXA: Add missing MAINTAINERS entries
PXA: Add necessary information for RELOC
PXA: Fix reloc, Push lowlevel init into C code
PXA: Fix vpac270 for Reloc
PXA: Fix ZipitZ2 for Reloc
PXA: Fix Balloon3 for Reloc
PXA: Fix vpac270 OneNAND booter
Build: PXA: Fix Vpac270 build variants
Build: PXA: Fix TrizepsIV build variants
Mikhail Kshevetskiy (4):
PXA: remove unused u-boot.lds from board/vpac270
PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000
PXA: fix environment sector size, kernel and environment location for
vpac270
PXA: fix MDREFR[APD] bit setting
MAINTAINERS | 9 +
MAKEALL | 7 +-
Makefile | 17 -
arch/arm/cpu/pxa/cpu.c | 255 +++-
arch/arm/cpu/pxa/i2c.c | 69 +-
arch/arm/cpu/pxa/pxafb.c | 365 +++--
arch/arm/cpu/pxa/start.S | 346 ++---
arch/arm/cpu/pxa/timer.c | 7 +-
arch/arm/cpu/pxa/usb.c | 61 +-
arch/arm/include/asm/arch-pxa/hardware.h | 61 +-
arch/arm/include/asm/arch-pxa/macro.h | 20 +-
arch/arm/include/asm/arch-pxa/pxa-regs.h | 2688 +++++++++++++++--------------
board/balloon3/Makefile | 47 +
board/balloon3/balloon3.c | 238 +++
board/colibri_pxa270/colibri_pxa270.c | 33 +-
board/cradle/cradle.c | 5 +-
board/cradle/lowlevel_init.S | 4 +-
board/csb226/csb226.c | 13 +-
board/delta/delta.c | 37 +-
board/delta/nand.c | 110 +-
board/innokom/innokom.c | 14 +-
board/palmld/Makefile | 49 +
board/palmld/config.mk | 1 +
board/{zipitz2 => palmld}/lowlevel_init.S | 9 +-
board/palmld/palmld.c | 69 +
board/{vpac270 => palmld}/u-boot.lds | 7 +-
board/palmtc/Makefile | 49 +
board/palmtc/config.mk | 1 +
board/{vpac270 => palmtc}/lowlevel_init.S | 3 +-
board/palmtc/palmtc.c | 59 +
board/{vpac270 => palmtc}/u-boot.lds | 7 +-
board/pxa255_idp/pxa_idp.c | 27 +-
board/trizepsiv/conxs.c | 35 +-
board/vpac270/Makefile | 17 +-
board/vpac270/config.mk | 1 -
board/vpac270/vpac270.c | 92 +-
board/wepep250/wepep250.c | 11 +-
board/zipitz2/Makefile | 10 +-
board/zipitz2/config.mk | 1 -
board/zipitz2/zipitz2.c | 57 +-
board/zylonite/nand.c | 110 +-
boards.cfg | 8 +
common/serial.c | 2 +-
drivers/mmc/pxa_mmc.c | 98 +-
drivers/serial/serial_pxa.c | 94 +-
include/configs/balloon3.h | 274 +++
include/configs/cerf250.h | 3 +
include/configs/colibri_pxa270.h | 3 +
include/configs/cradle.h | 5 +-
include/configs/csb226.h | 3 +
include/configs/delta.h | 4 +
include/configs/innokom.h | 3 +
include/configs/lubbock.h | 3 +
include/configs/palmld.h | 276 +++
include/configs/palmtc.h | 248 +++
include/configs/pleb2.h | 3 +
include/configs/pxa255_idp.h | 3 +
include/configs/trizepsiv.h | 3 +
include/configs/vpac270.h | 138 +-
include/configs/wepep250.h | 4 +
include/configs/xaeniax.h | 3 +
include/configs/xm250.h | 3 +
include/configs/xsengine.h | 3 +
include/configs/zipitz2.h | 10 +-
include/configs/zylonite.h | 3 +
onenand_ipl/board/vpac270/Makefile | 5 +-
66 files changed, 4017 insertions(+), 2206 deletions(-)
create mode 100644 board/balloon3/Makefile
create mode 100644 board/balloon3/balloon3.c
create mode 100644 board/palmld/Makefile
create mode 100644 board/palmld/config.mk
rename board/{zipitz2 => palmld}/lowlevel_init.S (90%)
create mode 100644 board/palmld/palmld.c
copy board/{vpac270 => palmld}/u-boot.lds (90%)
create mode 100644 board/palmtc/Makefile
create mode 100644 board/palmtc/config.mk
rename board/{vpac270 => palmtc}/lowlevel_init.S (95%)
create mode 100644 board/palmtc/palmtc.c
rename board/{vpac270 => palmtc}/u-boot.lds (90%)
delete mode 100644 board/vpac270/config.mk
delete mode 100644 board/zipitz2/config.mk
create mode 100644 include/configs/balloon3.h
create mode 100644 include/configs/palmld.h
create mode 100644 include/configs/palmtc.h
^ permalink raw reply [flat|nested] 11+ messages in thread* [U-Boot] [PULL] U-Boot-pxa pull request
2010-10-19 20:28 Marek Vasut
@ 2010-10-19 20:41 ` Wolfgang Denk
2010-10-19 22:07 ` Wolfgang Denk
1 sibling, 0 replies; 11+ messages in thread
From: Wolfgang Denk @ 2010-10-19 20:41 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <201010192228.34814.marek.vasut@gmail.com> you wrote:
> Hi,
> please pull my git://git.denx.de/u-boot-pxa for-wd-testing branch into your u-
> boot-testing/Makefile-cleanup branch. Thanks
>
> The following changes since commit a5cb985d8006bd1bb6d188b84f435f5d007fd6ac:
>
> Makefile: move all Power Architecture boards into boards.cfg (2010-10-17
> 01:34:08 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git for-wd-testing
I send you the result of the pull off list.
You really need to reabse your tree:
-> cd u-boot-arm/
-> git remote update
...
-> git pull u-boot-pxa.git for-wd-testing
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PULL] U-Boot-pxa pull request
2010-10-19 20:28 Marek Vasut
2010-10-19 20:41 ` Wolfgang Denk
@ 2010-10-19 22:07 ` Wolfgang Denk
1 sibling, 0 replies; 11+ messages in thread
From: Wolfgang Denk @ 2010-10-19 22:07 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <201010192228.34814.marek.vasut@gmail.com> you wrote:
> Hi,
> please pull my git://git.denx.de/u-boot-pxa for-wd-testing branch into your u-
> boot-testing/Makefile-cleanup branch. Thanks
>
> The following changes since commit a5cb985d8006bd1bb6d188b84f435f5d007fd6ac:
>
> Makefile: move all Power Architecture boards into boards.cfg (2010-10-17
> 01:34:08 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git for-wd-testing
>
> Marek Vasut (19):
> PXA: pxafb: Fix indent problems
> PXA: pxa-regs.h cleanup
> PXA: pxafb: Add ACX517AKN support
> PXA: pxafb: Add support for Sharp LQ038J7DH53
> PXA: pxafb: Marvell Littleton LCD definition
> common: Enable serial for PXA250
> PXA: Palm Tungsten|C Support
> PXA: Add initial Palm LifeDrive support
> PXA: Voipac270 improvements
> PXA: Balloon3 board support
> PXA: Add missing MAINTAINERS entries
> PXA: Add necessary information for RELOC
> PXA: Fix reloc, Push lowlevel init into C code
> PXA: Fix vpac270 for Reloc
> PXA: Fix ZipitZ2 for Reloc
> PXA: Fix Balloon3 for Reloc
> PXA: Fix vpac270 OneNAND booter
> Build: PXA: Fix Vpac270 build variants
> Build: PXA: Fix TrizepsIV build variants
>
> Mikhail Kshevetskiy (4):
> PXA: remove unused u-boot.lds from board/vpac270
> PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000
> PXA: fix environment sector size, kernel and environment location for
> vpac270
> PXA: fix MDREFR[APD] bit setting
>
> MAINTAINERS | 9 +
> MAKEALL | 7 +-
> Makefile | 17 -
> arch/arm/cpu/pxa/cpu.c | 255 +++-
> arch/arm/cpu/pxa/i2c.c | 69 +-
> arch/arm/cpu/pxa/pxafb.c | 365 +++--
> arch/arm/cpu/pxa/start.S | 346 ++---
> arch/arm/cpu/pxa/timer.c | 7 +-
> arch/arm/cpu/pxa/usb.c | 61 +-
> arch/arm/include/asm/arch-pxa/hardware.h | 61 +-
> arch/arm/include/asm/arch-pxa/macro.h | 20 +-
> arch/arm/include/asm/arch-pxa/pxa-regs.h | 2688 +++++++++++++++--------------
> board/balloon3/Makefile | 47 +
> board/balloon3/balloon3.c | 238 +++
> board/colibri_pxa270/colibri_pxa270.c | 33 +-
> board/cradle/cradle.c | 5 +-
> board/cradle/lowlevel_init.S | 4 +-
> board/csb226/csb226.c | 13 +-
> board/delta/delta.c | 37 +-
> board/delta/nand.c | 110 +-
> board/innokom/innokom.c | 14 +-
> board/palmld/Makefile | 49 +
> board/palmld/config.mk | 1 +
> board/{zipitz2 => palmld}/lowlevel_init.S | 9 +-
> board/palmld/palmld.c | 69 +
> board/{vpac270 => palmld}/u-boot.lds | 7 +-
> board/palmtc/Makefile | 49 +
> board/palmtc/config.mk | 1 +
> board/{vpac270 => palmtc}/lowlevel_init.S | 3 +-
> board/palmtc/palmtc.c | 59 +
> board/{vpac270 => palmtc}/u-boot.lds | 7 +-
> board/pxa255_idp/pxa_idp.c | 27 +-
> board/trizepsiv/conxs.c | 35 +-
> board/vpac270/Makefile | 17 +-
> board/vpac270/config.mk | 1 -
> board/vpac270/vpac270.c | 92 +-
> board/wepep250/wepep250.c | 11 +-
> board/zipitz2/Makefile | 10 +-
> board/zipitz2/config.mk | 1 -
> board/zipitz2/zipitz2.c | 57 +-
> board/zylonite/nand.c | 110 +-
> boards.cfg | 8 +
> common/serial.c | 2 +-
> drivers/mmc/pxa_mmc.c | 98 +-
> drivers/serial/serial_pxa.c | 94 +-
> include/configs/balloon3.h | 274 +++
> include/configs/cerf250.h | 3 +
> include/configs/colibri_pxa270.h | 3 +
> include/configs/cradle.h | 5 +-
> include/configs/csb226.h | 3 +
> include/configs/delta.h | 4 +
> include/configs/innokom.h | 3 +
> include/configs/lubbock.h | 3 +
> include/configs/palmld.h | 276 +++
> include/configs/palmtc.h | 248 +++
> include/configs/pleb2.h | 3 +
> include/configs/pxa255_idp.h | 3 +
> include/configs/trizepsiv.h | 3 +
> include/configs/vpac270.h | 138 +-
> include/configs/wepep250.h | 4 +
> include/configs/xaeniax.h | 3 +
> include/configs/xm250.h | 3 +
> include/configs/xsengine.h | 3 +
> include/configs/zipitz2.h | 10 +-
> include/configs/zylonite.h | 3 +
> onenand_ipl/board/vpac270/Makefile | 5 +-
> 66 files changed, 4017 insertions(+), 2206 deletions(-)
> create mode 100644 board/balloon3/Makefile
> create mode 100644 board/balloon3/balloon3.c
> create mode 100644 board/palmld/Makefile
> create mode 100644 board/palmld/config.mk
> rename board/{zipitz2 => palmld}/lowlevel_init.S (90%)
> create mode 100644 board/palmld/palmld.c
> copy board/{vpac270 => palmld}/u-boot.lds (90%)
> create mode 100644 board/palmtc/Makefile
> create mode 100644 board/palmtc/config.mk
> rename board/{vpac270 => palmtc}/lowlevel_init.S (95%)
> create mode 100644 board/palmtc/palmtc.c
> rename board/{vpac270 => palmtc}/u-boot.lds (90%)
> delete mode 100644 board/vpac270/config.mk
> delete mode 100644 board/zipitz2/config.mk
> create mode 100644 include/configs/balloon3.h
> create mode 100644 include/configs/palmld.h
> create mode 100644 include/configs/palmtc.h
Dunno what was wrong with your tree.
Cherry-picked the commits one by one.
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
So we follow our wandering paths, and the very darkness acts as our
guide and our doubts serve to reassure us. - Jean-Pierre de Caussade,
eighteenth-century Jesuit priest
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PULL] U-Boot-pxa pull request
@ 2010-10-21 23:41 Marek Vasut
2010-10-23 20:08 ` Wolfgang Denk
0 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2010-10-21 23:41 UTC (permalink / raw)
To: u-boot
Hi,
please pull my git://git.denx.de/u-boot-pxa for-wd-master branch into your u-
boot/master branch. Thanks
The following changes since commit fff6ec382c139eb242bd85356e66a0bc43becb63:
Fix building for 83xx boards with USB support (2010-10-21 20:00:41 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git for-wd-master
Marek Vasut (20):
PXA: Implement ELF relocation
PXA: Use pxa-regs.h register definitions in start.S
PXA: cerf250: Fix for reloc
PXA: colibri_pxa270: Fix for reloc
PXA: cradle: Fix for reloc
PXA: csb226: Fix for reloc
PXA: innokom: Fix for reloc
PXA: lubbock: Fix for reloc
PXA: palmld: Fix for reloc
PXA: palmtc: Fix for reloc
PXA: pleb2: Fix for reloc
PXA: pxa255_idp: Fix for reloc
PXA: trizepsiv: Fix for reloc
PXA: xaeniax: Fix for reloc
PXA: xm250: Fix for reloc
PXA: vpac270: Add missing CONFIG_SYS_TEXT_BASE
PXA: zipitz2: Add missing CONFIG_SYS_TEXT_BASE
PXA: Remove "delta" board
PXA: Remove "wepep250" board
PXA: Remove "xsengine" board
arch/arm/cpu/pxa/start.S | 149 +++++-----
arch/arm/cpu/pxa/u-boot.lds | 19 +-
board/cerf250/Makefile | 10 +-
board/cerf250/cerf250.c | 22 +-
board/cerf250/config.mk | 5 -
board/cerf250/lowlevel_init.S | 411 ------------------------
board/colibri_pxa270/Makefile | 10 +-
board/colibri_pxa270/colibri_pxa270.c | 18 +-
board/colibri_pxa270/config.mk | 1 -
board/colibri_pxa270/lowlevel_init.S | 36 ---
board/cradle/Makefile | 10 +-
board/cradle/config.mk | 2 -
board/cradle/cradle.c | 30 +-
board/cradle/lowlevel_init.S | 515 ------------------------------
board/csb226/Makefile | 10 +-
board/csb226/config.mk | 15 -
board/csb226/csb226.c | 22 +-
board/csb226/lowlevel_init.S | 437 --------------------------
board/delta/Makefile | 52 ---
board/delta/config.mk | 1 -
board/delta/delta.c | 378 ----------------------
board/delta/lowlevel_init.S | 146 ---------
board/delta/nand.c | 558 ---------------------------------
board/innokom/Makefile | 10 +-
board/innokom/config.mk | 15 -
board/innokom/innokom.c | 23 +-
board/innokom/lowlevel_init.S | 437 --------------------------
board/lubbock/Makefile | 10 +-
board/lubbock/config.mk | 3 -
board/lubbock/lowlevel_init.S | 411 ------------------------
board/lubbock/lubbock.c | 22 +-
board/palmld/Makefile | 10 +-
board/palmld/config.mk | 1 -
board/palmld/lowlevel_init.S | 45 ---
board/palmld/palmld.c | 16 +-
board/palmld/u-boot.lds | 56 ----
board/palmtc/Makefile | 9 +-
board/palmtc/config.mk | 1 -
board/palmtc/lowlevel_init.S | 39 ---
board/palmtc/palmtc.c | 13 +-
board/palmtc/u-boot.lds | 56 ----
board/pleb2/Makefile | 10 +-
board/pleb2/config.mk | 3 -
board/pleb2/lowlevel_init.S | 488 ----------------------------
board/pleb2/pleb2.c | 22 +-
board/pxa255_idp/Makefile | 10 +-
board/pxa255_idp/config.mk | 3 -
board/pxa255_idp/lowlevel_init.S | 496 -----------------------------
board/pxa255_idp/pxa_idp.c | 23 +-
board/trizepsiv/Makefile | 10 +-
board/trizepsiv/config.mk | 3 -
board/trizepsiv/conxs.c | 23 +-
board/trizepsiv/lowlevel_init.S | 503 -----------------------------
board/trizepsiv/pxavoltage.S | 29 --
board/wepep250/Makefile | 51 ---
board/wepep250/config.mk | 11 -
board/wepep250/flash.c | 324 -------------------
board/wepep250/intel.h | 99 ------
board/wepep250/lowlevel_init.S | 145 ---------
board/wepep250/wepep250.c | 68 ----
board/xaeniax/Makefile | 10 +-
board/xaeniax/config.mk | 2 -
board/xaeniax/lowlevel_init.S | 424 -------------------------
board/xaeniax/xaeniax.c | 22 +-
board/xm250/Makefile | 10 +-
board/xm250/config.mk | 35 --
board/xm250/lowlevel_init.S | 519 ------------------------------
board/xm250/xm250.c | 27 +-
board/xsengine/Makefile | 51 ---
board/xsengine/config.mk | 1 -
board/xsengine/flash.c | 470 ---------------------------
board/xsengine/lowlevel_init.S | 221 -------------
board/xsengine/xsengine.c | 75 -----
boards.cfg | 3 -
include/configs/cerf250.h | 14 +-
include/configs/colibri_pxa270.h | 2 +-
include/configs/cradle.h | 18 +-
include/configs/csb226.h | 7 +-
include/configs/delta.h | 267 ----------------
include/configs/innokom.h | 8 +
include/configs/lubbock.h | 8 +-
include/configs/palmld.h | 1 +
include/configs/palmtc.h | 1 +
include/configs/pleb2.h | 18 +-
include/configs/pxa255_idp.h | 8 +-
include/configs/trizepsiv.h | 1 +
include/configs/vpac270.h | 1 +
include/configs/wepep250.h | 199 ------------
include/configs/xaeniax.h | 9 +-
include/configs/xm250.h | 9 +-
include/configs/xsengine.h | 216 -------------
include/configs/zipitz2.h | 1 +
92 files changed, 355 insertions(+), 8658 deletions(-)
delete mode 100644 board/cerf250/config.mk
delete mode 100644 board/cerf250/lowlevel_init.S
delete mode 100644 board/colibri_pxa270/config.mk
delete mode 100644 board/colibri_pxa270/lowlevel_init.S
delete mode 100644 board/cradle/config.mk
delete mode 100644 board/cradle/lowlevel_init.S
delete mode 100644 board/csb226/config.mk
delete mode 100644 board/csb226/lowlevel_init.S
delete mode 100644 board/delta/Makefile
delete mode 100644 board/delta/config.mk
delete mode 100644 board/delta/delta.c
delete mode 100644 board/delta/lowlevel_init.S
delete mode 100644 board/delta/nand.c
delete mode 100644 board/innokom/config.mk
delete mode 100644 board/innokom/lowlevel_init.S
delete mode 100644 board/lubbock/config.mk
delete mode 100644 board/lubbock/lowlevel_init.S
delete mode 100644 board/palmld/config.mk
delete mode 100644 board/palmld/lowlevel_init.S
delete mode 100644 board/palmld/u-boot.lds
delete mode 100644 board/palmtc/config.mk
delete mode 100644 board/palmtc/lowlevel_init.S
delete mode 100644 board/palmtc/u-boot.lds
delete mode 100644 board/pleb2/config.mk
delete mode 100644 board/pleb2/lowlevel_init.S
delete mode 100644 board/pxa255_idp/config.mk
delete mode 100644 board/pxa255_idp/lowlevel_init.S
delete mode 100644 board/trizepsiv/config.mk
delete mode 100644 board/trizepsiv/lowlevel_init.S
delete mode 100644 board/trizepsiv/pxavoltage.S
delete mode 100644 board/wepep250/Makefile
delete mode 100644 board/wepep250/config.mk
delete mode 100644 board/wepep250/flash.c
delete mode 100644 board/wepep250/intel.h
delete mode 100644 board/wepep250/lowlevel_init.S
delete mode 100644 board/wepep250/wepep250.c
delete mode 100644 board/xaeniax/config.mk
delete mode 100644 board/xaeniax/lowlevel_init.S
delete mode 100644 board/xm250/config.mk
delete mode 100644 board/xm250/lowlevel_init.S
delete mode 100644 board/xsengine/Makefile
delete mode 100644 board/xsengine/config.mk
delete mode 100644 board/xsengine/flash.c
delete mode 100644 board/xsengine/lowlevel_init.S
delete mode 100644 board/xsengine/xsengine.c
delete mode 100644 include/configs/delta.h
delete mode 100644 include/configs/wepep250.h
delete mode 100644 include/configs/xsengine.h
^ permalink raw reply [flat|nested] 11+ messages in thread* [U-Boot] [PULL] U-Boot-pxa pull request
2010-10-21 23:41 Marek Vasut
@ 2010-10-23 20:08 ` Wolfgang Denk
0 siblings, 0 replies; 11+ messages in thread
From: Wolfgang Denk @ 2010-10-23 20:08 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <201010220141.33121.marek.vasut@gmail.com> you wrote:
> Hi,
> please pull my git://git.denx.de/u-boot-pxa for-wd-master branch into your u-
> boot/master branch. Thanks
>
> The following changes since commit fff6ec382c139eb242bd85356e66a0bc43becb63:
>
> Fix building for 83xx boards with USB support (2010-10-21 20:00:41 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git for-wd-master
>
> Marek Vasut (20):
> PXA: Implement ELF relocation
> PXA: Use pxa-regs.h register definitions in start.S
> PXA: cerf250: Fix for reloc
> PXA: colibri_pxa270: Fix for reloc
> PXA: cradle: Fix for reloc
> PXA: csb226: Fix for reloc
> PXA: innokom: Fix for reloc
> PXA: lubbock: Fix for reloc
> PXA: palmld: Fix for reloc
> PXA: palmtc: Fix for reloc
> PXA: pleb2: Fix for reloc
> PXA: pxa255_idp: Fix for reloc
> PXA: trizepsiv: Fix for reloc
> PXA: xaeniax: Fix for reloc
> PXA: xm250: Fix for reloc
> PXA: vpac270: Add missing CONFIG_SYS_TEXT_BASE
> PXA: zipitz2: Add missing CONFIG_SYS_TEXT_BASE
> PXA: Remove "delta" board
> PXA: Remove "wepep250" board
> PXA: Remove "xsengine" board
>
> arch/arm/cpu/pxa/start.S | 149 +++++-----
> arch/arm/cpu/pxa/u-boot.lds | 19 +-
> board/cerf250/Makefile | 10 +-
> board/cerf250/cerf250.c | 22 +-
> board/cerf250/config.mk | 5 -
> board/cerf250/lowlevel_init.S | 411 ------------------------
> board/colibri_pxa270/Makefile | 10 +-
> board/colibri_pxa270/colibri_pxa270.c | 18 +-
> board/colibri_pxa270/config.mk | 1 -
> board/colibri_pxa270/lowlevel_init.S | 36 ---
> board/cradle/Makefile | 10 +-
> board/cradle/config.mk | 2 -
> board/cradle/cradle.c | 30 +-
> board/cradle/lowlevel_init.S | 515 ------------------------------
> board/csb226/Makefile | 10 +-
> board/csb226/config.mk | 15 -
> board/csb226/csb226.c | 22 +-
> board/csb226/lowlevel_init.S | 437 --------------------------
> board/delta/Makefile | 52 ---
> board/delta/config.mk | 1 -
> board/delta/delta.c | 378 ----------------------
> board/delta/lowlevel_init.S | 146 ---------
> board/delta/nand.c | 558 ---------------------------------
> board/innokom/Makefile | 10 +-
> board/innokom/config.mk | 15 -
> board/innokom/innokom.c | 23 +-
> board/innokom/lowlevel_init.S | 437 --------------------------
> board/lubbock/Makefile | 10 +-
> board/lubbock/config.mk | 3 -
> board/lubbock/lowlevel_init.S | 411 ------------------------
> board/lubbock/lubbock.c | 22 +-
> board/palmld/Makefile | 10 +-
> board/palmld/config.mk | 1 -
> board/palmld/lowlevel_init.S | 45 ---
> board/palmld/palmld.c | 16 +-
> board/palmld/u-boot.lds | 56 ----
> board/palmtc/Makefile | 9 +-
> board/palmtc/config.mk | 1 -
> board/palmtc/lowlevel_init.S | 39 ---
> board/palmtc/palmtc.c | 13 +-
> board/palmtc/u-boot.lds | 56 ----
> board/pleb2/Makefile | 10 +-
> board/pleb2/config.mk | 3 -
> board/pleb2/lowlevel_init.S | 488 ----------------------------
> board/pleb2/pleb2.c | 22 +-
> board/pxa255_idp/Makefile | 10 +-
> board/pxa255_idp/config.mk | 3 -
> board/pxa255_idp/lowlevel_init.S | 496 -----------------------------
> board/pxa255_idp/pxa_idp.c | 23 +-
> board/trizepsiv/Makefile | 10 +-
> board/trizepsiv/config.mk | 3 -
> board/trizepsiv/conxs.c | 23 +-
> board/trizepsiv/lowlevel_init.S | 503 -----------------------------
> board/trizepsiv/pxavoltage.S | 29 --
> board/wepep250/Makefile | 51 ---
> board/wepep250/config.mk | 11 -
> board/wepep250/flash.c | 324 -------------------
> board/wepep250/intel.h | 99 ------
> board/wepep250/lowlevel_init.S | 145 ---------
> board/wepep250/wepep250.c | 68 ----
> board/xaeniax/Makefile | 10 +-
> board/xaeniax/config.mk | 2 -
> board/xaeniax/lowlevel_init.S | 424 -------------------------
> board/xaeniax/xaeniax.c | 22 +-
> board/xm250/Makefile | 10 +-
> board/xm250/config.mk | 35 --
> board/xm250/lowlevel_init.S | 519 ------------------------------
> board/xm250/xm250.c | 27 +-
> board/xsengine/Makefile | 51 ---
> board/xsengine/config.mk | 1 -
> board/xsengine/flash.c | 470 ---------------------------
> board/xsengine/lowlevel_init.S | 221 -------------
> board/xsengine/xsengine.c | 75 -----
> boards.cfg | 3 -
> include/configs/cerf250.h | 14 +-
> include/configs/colibri_pxa270.h | 2 +-
> include/configs/cradle.h | 18 +-
> include/configs/csb226.h | 7 +-
> include/configs/delta.h | 267 ----------------
> include/configs/innokom.h | 8 +
> include/configs/lubbock.h | 8 +-
> include/configs/palmld.h | 1 +
> include/configs/palmtc.h | 1 +
> include/configs/pleb2.h | 18 +-
> include/configs/pxa255_idp.h | 8 +-
> include/configs/trizepsiv.h | 1 +
> include/configs/vpac270.h | 1 +
> include/configs/wepep250.h | 199 ------------
> include/configs/xaeniax.h | 9 +-
> include/configs/xm250.h | 9 +-
> include/configs/xsengine.h | 216 -------------
> include/configs/zipitz2.h | 1 +
> 92 files changed, 355 insertions(+), 8658 deletions(-)
> delete mode 100644 board/cerf250/config.mk
> delete mode 100644 board/cerf250/lowlevel_init.S
> delete mode 100644 board/colibri_pxa270/config.mk
> delete mode 100644 board/colibri_pxa270/lowlevel_init.S
> delete mode 100644 board/cradle/config.mk
> delete mode 100644 board/cradle/lowlevel_init.S
> delete mode 100644 board/csb226/config.mk
> delete mode 100644 board/csb226/lowlevel_init.S
> delete mode 100644 board/delta/Makefile
> delete mode 100644 board/delta/config.mk
> delete mode 100644 board/delta/delta.c
> delete mode 100644 board/delta/lowlevel_init.S
> delete mode 100644 board/delta/nand.c
> delete mode 100644 board/innokom/config.mk
> delete mode 100644 board/innokom/lowlevel_init.S
> delete mode 100644 board/lubbock/config.mk
> delete mode 100644 board/lubbock/lowlevel_init.S
> delete mode 100644 board/palmld/config.mk
> delete mode 100644 board/palmld/lowlevel_init.S
> delete mode 100644 board/palmld/u-boot.lds
> delete mode 100644 board/palmtc/config.mk
> delete mode 100644 board/palmtc/lowlevel_init.S
> delete mode 100644 board/palmtc/u-boot.lds
> delete mode 100644 board/pleb2/config.mk
> delete mode 100644 board/pleb2/lowlevel_init.S
> delete mode 100644 board/pxa255_idp/config.mk
> delete mode 100644 board/pxa255_idp/lowlevel_init.S
> delete mode 100644 board/trizepsiv/config.mk
> delete mode 100644 board/trizepsiv/lowlevel_init.S
> delete mode 100644 board/trizepsiv/pxavoltage.S
> delete mode 100644 board/wepep250/Makefile
> delete mode 100644 board/wepep250/config.mk
> delete mode 100644 board/wepep250/flash.c
> delete mode 100644 board/wepep250/intel.h
> delete mode 100644 board/wepep250/lowlevel_init.S
> delete mode 100644 board/wepep250/wepep250.c
> delete mode 100644 board/xaeniax/config.mk
> delete mode 100644 board/xaeniax/lowlevel_init.S
> delete mode 100644 board/xm250/config.mk
> delete mode 100644 board/xm250/lowlevel_init.S
> delete mode 100644 board/xsengine/Makefile
> delete mode 100644 board/xsengine/config.mk
> delete mode 100644 board/xsengine/flash.c
> delete mode 100644 board/xsengine/lowlevel_init.S
> delete mode 100644 board/xsengine/xsengine.c
> delete mode 100644 include/configs/delta.h
> delete mode 100644 include/configs/wepep250.h
> delete mode 100644 include/configs/xsengine.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A Chairman was as necessary to a Board planet as the zero was in
mathematics, but being a zero had big disadvantages...
- Terry Pratchett, _The Dark Side of the Sun_
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PULL] U-Boot-pxa pull request
@ 2010-10-27 22:05 Marek Vasut
2010-10-29 19:45 ` Wolfgang Denk
0 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2010-10-27 22:05 UTC (permalink / raw)
To: u-boot
Hi,
please pull my git://git.denx.de/u-boot-pxa for-wd-master branch into your u-
boot/master branch. Thanks
The following changes since commit 908614f20f7f0f5df736eed21b88e81ebbf14e86:
Prepare v2010.12-rc1 (2010-10-27 22:49:13 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git for-wd-master
Mikhail Kshevetskiy (1):
arm/pxa: remove unused arch-pxa/macro.h
arch/arm/cpu/pxa/start.S | 1 -
arch/arm/include/asm/arch-pxa/macro.h | 328 -----------------------------
onenand_ipl/board/vpac270/Makefile | 5 -
onenand_ipl/board/vpac270/lowlevel_init.S | 34 ---
4 files changed, 0 insertions(+), 368 deletions(-)
delete mode 100644 arch/arm/include/asm/arch-pxa/macro.h
delete mode 100644 onenand_ipl/board/vpac270/lowlevel_init.S
^ permalink raw reply [flat|nested] 11+ messages in thread* [U-Boot] [PULL] U-Boot-pxa pull request
2010-10-27 22:05 Marek Vasut
@ 2010-10-29 19:45 ` Wolfgang Denk
0 siblings, 0 replies; 11+ messages in thread
From: Wolfgang Denk @ 2010-10-29 19:45 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <201010280005.26816.marek.vasut@gmail.com> you wrote:
> Hi,
> please pull my git://git.denx.de/u-boot-pxa for-wd-master branch into your u-
> boot/master branch. Thanks
>
> The following changes since commit 908614f20f7f0f5df736eed21b88e81ebbf14e86:
>
> Prepare v2010.12-rc1 (2010-10-27 22:49:13 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git for-wd-master
>
> Mikhail Kshevetskiy (1):
> arm/pxa: remove unused arch-pxa/macro.h
>
> arch/arm/cpu/pxa/start.S | 1 -
> arch/arm/include/asm/arch-pxa/macro.h | 328 -----------------------------
> onenand_ipl/board/vpac270/Makefile | 5 -
> onenand_ipl/board/vpac270/lowlevel_init.S | 34 ---
> 4 files changed, 0 insertions(+), 368 deletions(-)
> delete mode 100644 arch/arm/include/asm/arch-pxa/macro.h
> delete mode 100644 onenand_ipl/board/vpac270/lowlevel_init.S
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is impractical for the standard to attempt to constrain the
behavior of code that does not obey the constraints of the standard.
- Doug Gwyn
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PULL] U-Boot-pxa pull request
@ 2011-05-27 14:56 Marek Vasut
2011-06-23 6:27 ` Albert ARIBAUD
0 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2011-05-27 14:56 UTC (permalink / raw)
To: u-boot
Hi,
please pull my git://git.denx.de/u-boot-pxa ixp branch into your u-
boot/master branch. Thanks
These are mostly the IXP changes + I added the fix I promissed you half a year
ago ... damn the time runs fast :-/
Cheers
The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
.gitignore: update list of u-boot.* files and add *.bin (2011-05-22 23:46:26
+0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git ixp
Marek Vasut (1):
Move wepep250,delta,xsengine to scrapyard
Michael Schwingen (17):
add XScale sub architecture (IXP/PXA) to maintainer list
add support for IXP42x Rev. B1 and newer
trigger hardware watchdog in IXP42x serial driver
Fix IXP code to work after relocation was added
fix "depend" target in npe directory
support CONFIG_SYS_LDSCRIPT on ARM
use -ffunction-sections / --gc-sections on IXP42x
update/fix AcTux1 board
update/fix AcTux2 board
update/fix AcTux3 board
update/fix AcTux4 board
IXP NPE: add support for fixed-speed MII ports
add dvlhost (dLAN 200 AV Wireless G) board
update/fix IXDP425 / IXDPG425 boards
update/fix PDNB3 board
IXP42x PCI rewrite
run arm_pci_init after relocation
MAINTAINERS | 49 ++--
arch/arm/config.mk | 7 +
arch/arm/cpu/ixp/config.mk | 5 +
arch/arm/cpu/ixp/cpu.c | 5 -
arch/arm/cpu/ixp/npe/Makefile | 1 +
arch/arm/cpu/ixp/npe/npe.c | 74 +++--
arch/arm/cpu/ixp/start.S | 59 +---
arch/arm/cpu/ixp/timer.c | 124 +++---
arch/arm/cpu/ixp/u-boot.lds | 8 +-
arch/arm/include/asm/arch-ixp/ixp425.h | 5 +-
arch/arm/include/asm/arch-ixp/ixp425pci.h | 130 +------
arch/arm/include/asm/global_data.h | 3 +
arch/arm/lib/board.c | 6 +-
board/actux1/actux1.c | 105 +++---
board/actux1/config.mk | 4 -
board/actux1/u-boot.lds | 41 ++-
board/actux2/actux2.c | 93 +++---
board/actux2/config.mk | 4 -
board/actux2/u-boot.lds | 46 ++-
board/actux3/actux3.c | 120 +++---
board/actux3/config.mk | 4 -
board/actux3/u-boot.lds | 52 ++-
board/actux4/actux4.c | 103 +++--
board/actux4/config.mk | 4 -
board/dvlhost/Makefile | 50 +++
board/dvlhost/dvlhost.c | 130 ++++++
board/dvlhost/dvlhost_hw.h | 47 +++
board/dvlhost/u-boot.lds | 87 ++++
board/dvlhost/watchdog.c | 43 ++
board/ixdp425/config.mk | 2 -
board/ixdp425/flash.c | 427 --------------------
board/ixdp425/ixdp425.c | 155 +++++++-
board/prodrive/pdnb3/config.mk | 2 -
boards.cfg | 8 +-
doc/README.scrapyard | 3 +
drivers/pci/pci.c | 4 -
drivers/pci/pci_indirect.c | 13 +-
drivers/pci/pci_ixp.c | 612 ++++++++++-------------------
drivers/serial/serial_ixp.c | 7 +-
include/configs/actux1.h | 62 ++--
include/configs/actux2.h | 35 ++-
include/configs/actux3.h | 37 ++-
include/configs/actux4.h | 39 ++-
include/configs/dvlhost.h | 248 ++++++++++++
include/configs/ixdp425.h | 196 +++++++---
include/configs/ixdpg425.h | 11 +-
include/configs/pdnb3.h | 10 +-
47 files changed, 1692 insertions(+), 1588 deletions(-)
delete mode 100644 board/actux1/config.mk
delete mode 100644 board/actux2/config.mk
delete mode 100644 board/actux3/config.mk
delete mode 100644 board/actux4/config.mk
create mode 100644 board/dvlhost/Makefile
create mode 100644 board/dvlhost/dvlhost.c
create mode 100644 board/dvlhost/dvlhost_hw.h
create mode 100644 board/dvlhost/u-boot.lds
create mode 100644 board/dvlhost/watchdog.c
delete mode 100644 board/ixdp425/config.mk
delete mode 100644 board/ixdp425/flash.c
delete mode 100644 board/prodrive/pdnb3/config.mk
create mode 100644 include/configs/dvlhost.h
^ permalink raw reply [flat|nested] 11+ messages in thread* [U-Boot] [PULL] U-Boot-pxa pull request
2011-05-27 14:56 Marek Vasut
@ 2011-06-23 6:27 ` Albert ARIBAUD
0 siblings, 0 replies; 11+ messages in thread
From: Albert ARIBAUD @ 2011-06-23 6:27 UTC (permalink / raw)
To: u-boot
Le 27/05/2011 16:56, Marek Vasut a ?crit :
> Hi,
> please pull my git://git.denx.de/u-boot-pxa ixp branch into your u-
> boot/master branch. Thanks
>
> These are mostly the IXP changes + I added the fix I promissed you half a year
> ago ... damn the time runs fast :-/
>
> Cheers
>
> The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
>
> .gitignore: update list of u-boot.* files and add *.bin (2011-05-22 23:46:26
> +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git ixp
>
> Marek Vasut (1):
> Move wepep250,delta,xsengine to scrapyard
>
> Michael Schwingen (17):
> add XScale sub architecture (IXP/PXA) to maintainer list
> add support for IXP42x Rev. B1 and newer
> trigger hardware watchdog in IXP42x serial driver
> Fix IXP code to work after relocation was added
> fix "depend" target in npe directory
> support CONFIG_SYS_LDSCRIPT on ARM
> use -ffunction-sections / --gc-sections on IXP42x
> update/fix AcTux1 board
> update/fix AcTux2 board
> update/fix AcTux3 board
> update/fix AcTux4 board
> IXP NPE: add support for fixed-speed MII ports
> add dvlhost (dLAN 200 AV Wireless G) board
> update/fix IXDP425 / IXDPG425 boards
> update/fix PDNB3 board
> IXP42x PCI rewrite
> run arm_pci_init after relocation
>
> MAINTAINERS | 49 ++--
> arch/arm/config.mk | 7 +
> arch/arm/cpu/ixp/config.mk | 5 +
> arch/arm/cpu/ixp/cpu.c | 5 -
> arch/arm/cpu/ixp/npe/Makefile | 1 +
> arch/arm/cpu/ixp/npe/npe.c | 74 +++--
> arch/arm/cpu/ixp/start.S | 59 +---
> arch/arm/cpu/ixp/timer.c | 124 +++---
> arch/arm/cpu/ixp/u-boot.lds | 8 +-
> arch/arm/include/asm/arch-ixp/ixp425.h | 5 +-
> arch/arm/include/asm/arch-ixp/ixp425pci.h | 130 +------
> arch/arm/include/asm/global_data.h | 3 +
> arch/arm/lib/board.c | 6 +-
> board/actux1/actux1.c | 105 +++---
> board/actux1/config.mk | 4 -
> board/actux1/u-boot.lds | 41 ++-
> board/actux2/actux2.c | 93 +++---
> board/actux2/config.mk | 4 -
> board/actux2/u-boot.lds | 46 ++-
> board/actux3/actux3.c | 120 +++---
> board/actux3/config.mk | 4 -
> board/actux3/u-boot.lds | 52 ++-
> board/actux4/actux4.c | 103 +++--
> board/actux4/config.mk | 4 -
> board/dvlhost/Makefile | 50 +++
> board/dvlhost/dvlhost.c | 130 ++++++
> board/dvlhost/dvlhost_hw.h | 47 +++
> board/dvlhost/u-boot.lds | 87 ++++
> board/dvlhost/watchdog.c | 43 ++
> board/ixdp425/config.mk | 2 -
> board/ixdp425/flash.c | 427 --------------------
> board/ixdp425/ixdp425.c | 155 +++++++-
> board/prodrive/pdnb3/config.mk | 2 -
> boards.cfg | 8 +-
> doc/README.scrapyard | 3 +
> drivers/pci/pci.c | 4 -
> drivers/pci/pci_indirect.c | 13 +-
> drivers/pci/pci_ixp.c | 612 ++++++++++-------------------
> drivers/serial/serial_ixp.c | 7 +-
> include/configs/actux1.h | 62 ++--
> include/configs/actux2.h | 35 ++-
> include/configs/actux3.h | 37 ++-
> include/configs/actux4.h | 39 ++-
> include/configs/dvlhost.h | 248 ++++++++++++
> include/configs/ixdp425.h | 196 +++++++---
> include/configs/ixdpg425.h | 11 +-
> include/configs/pdnb3.h | 10 +-
> 47 files changed, 1692 insertions(+), 1588 deletions(-)
> delete mode 100644 board/actux1/config.mk
> delete mode 100644 board/actux2/config.mk
> delete mode 100644 board/actux3/config.mk
> delete mode 100644 board/actux4/config.mk
> create mode 100644 board/dvlhost/Makefile
> create mode 100644 board/dvlhost/dvlhost.c
> create mode 100644 board/dvlhost/dvlhost_hw.h
> create mode 100644 board/dvlhost/u-boot.lds
> create mode 100644 board/dvlhost/watchdog.c
> delete mode 100644 board/ixdp425/config.mk
> delete mode 100644 board/ixdp425/flash.c
> delete mode 100644 board/prodrive/pdnb3/config.mk
> create mode 100644 include/configs/dvlhost.h
Applied (with a trivial merge on boards.cfg), thanks, and apologies for
missing this!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2011-06-23 6:27 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-20 9:58 [U-Boot] [PULL] U-Boot-pxa pull request Marek Vasut
2010-09-07 21:17 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2010-10-19 20:28 Marek Vasut
2010-10-19 20:41 ` Wolfgang Denk
2010-10-19 22:07 ` Wolfgang Denk
2010-10-21 23:41 Marek Vasut
2010-10-23 20:08 ` Wolfgang Denk
2010-10-27 22:05 Marek Vasut
2010-10-29 19:45 ` Wolfgang Denk
2011-05-27 14:56 Marek Vasut
2011-06-23 6:27 ` Albert ARIBAUD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox