[U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5

[David Jander <david.jander@protonic.nl>]

Stefano,

On Friday 20 August 2010 12:01:00 pm Stefano Babic wrote:
> > After this change, it seems something else is missing:
> > GCC somehow removed the following code for i.MX51 without actually
> > compiling the arguments to the functions (???), but now it becomes
> > evident this only compiles for i.MX31:
> 
> Understood, in SPI driver. Really I had another patch in my private
> tree, but I have not yet sent. However, as you note, it makes no sense
> to split changes in two patches.
> 
> I will rebase my tree and send V2 version of the pacth, inclusive the
> changes for mxc_spi.c

Ok, thanks!

> > void spi_cs_activate(struct spi_slave *slave)
> > {
> > 	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
> > 	if (mxcs->gpio > 0)
> > 		mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
> 
> I know, I had already change this code...I store ss_pol in the priivate
> structure to be independent from the processor register.
> 
> I will send the compound patch soon.

Great. I'll wait.
In the meantime I have just done this to get it working:

#ifdef CONFIG_MX31
void spi_cs_activate(struct spi_slave *slave)
{
	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
	if (mxcs->gpio > 0)
		mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
}

void spi_cs_deactivate(struct spi_slave *slave)
{
	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
	if (mxcs->gpio > 0)
		mxc_gpio_set(mxcs->gpio,
			      !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
}
#elif defined (CONFIG_MX51)
void spi_cs_activate(struct spi_slave *slave)
{
	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
	unsigned int val = mxcs->cfg_reg & 
			(1 << (slave->cs + MXC_CSPICON_SSPOL));
	if (mxcs->gpio > 0)
		mxc_gpio_set(mxcs->gpio, val);
}

void spi_cs_deactivate(struct spi_slave *slave)
{
	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
	unsigned int val = !(mxcs->cfg_reg & 
			(1 << (slave->cs + MXC_CSPICON_SSPOL)));
	if (mxcs->gpio > 0)
		mxc_gpio_set(mxcs->gpio, val);
}
#endif

Seems to work, but never mind...

Best regards,

-- 
David Jander
Protonic Holland.