[U-Boot] [PATCH] I2C: Add support for multiple I2C busses for SNTP (effect to RTC)

[Stephan Linz <linz@li-pro.net>]

Hello Heiko,
Hello Ben,


> Hello Stephan,
> 
> added Ben Warren to cc: because this is a change in net,
> which also falls in his area of responsibility ...

OK, fine ...

> 
> Stephan Linz wrote:
> > This patch switches to the desired I2C bus when the SNTP
> > network service is called. This can be configured using the
> > CONFIG_SYS_RTC_BUS_NUM define.
> > 
> > In my eyes this is a bad and quick hack, but the same as
> > was making for the date and dtt commands (commit: 0dc018e).
> > The right way would be to move all the hardware specific i2c
> > code down to the rtc driver layer.
> 
> Yes, thats would the best way, but why you don;t go this
> way?

It's easy: time .... Joking apart, this patch brings the network layer in harmony to the command layer regardless of how beautiful it is. In one of the next steps I (we) can create a new patch to resolve this unsightly condition and move the hardware specifics into the rtc layer. Even such a patch will grow up and change more than a dozen of files.

I'm a friend of more small steps. So I've changed this small piece. I offer to make the big change in the next few weeks ... ?

> Beside of that, this patch look good to me ...

OK.
Ben, what do you mean?

> 
> > Signed-off-by: Stephan Linz <linz@li-pro.net>
> > ---
> >  net/sntp.c |   18 ++++++++++++++++++
> >  1 files changed, 18 insertions(+), 0 deletions(-)
> > 
> > diff --git a/net/sntp.c b/net/sntp.c
> > index 76c10ec..5544570 100644
> > --- a/net/sntp.c
> > +++ b/net/sntp.c
> > @@ -10,6 +10,14 @@
> >  #include <net.h>
> >  #include <rtc.h>
> >  
> > +/*
> > + * FIXME: The i2c dependency should move into the RTC drivers itself.
> > + * This higher network layer must not know about hardware specifics!
> > + */
> > +#if defined(CONFIG_CMD_DATE)
> > +#include <i2c.h>
> > +#endif
> > +
> >  #include "sntp.h"
> >  
> >  #define SNTP_TIMEOUT 10000UL
> > @@ -53,6 +61,9 @@ SntpHandler (uchar *pkt, unsigned dest, unsigned src,
> unsigned len)
> >  	struct sntp_pkt_t *rpktp = (struct sntp_pkt_t *)pkt;
> >  	struct rtc_time tm;
> >  	ulong seconds;
> > +#if defined(CONFIG_CMD_DATE)
> > +	int old_bus;
> > +#endif
> >  
> >  	debug("%s\n", __func__);
> >  
> > @@ -66,7 +77,14 @@ SntpHandler (uchar *pkt, unsigned dest, unsigned src,
> unsigned len)
> >  
> >  	to_tm(ntohl(seconds) - 2208988800UL + NetTimeOffset, &tm);
> >  #if defined(CONFIG_CMD_DATE)
> > +	/* switch to correct I2C bus */
> > +	old_bus = I2C_GET_BUS();
> > +	I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM);
> > +
> >  	rtc_set (&tm);
> > +
> > +	/* switch back to original I2C bus */
> > +	I2C_SET_BUS(old_bus);
> >  #endif
> >  	printf ("Date: %4d-%02d-%02d Time: %2d:%02d:%02d\n",
> >  		tm.tm_year, tm.tm_mon, tm.tm_mday,
> 
> bye
> Heiko
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> 

--- original Nachricht Ende ----