From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 08/11] mtd: nand: supress 'unknown NAND' warning if no nand is found
Date: Tue, 7 Sep 2010 12:37:43 -0500 [thread overview]
Message-ID: <20100907123743.6ff8eeb2@schlenkerla.am.freescale.net> (raw)
In-Reply-To: <0554BEF07D437848AF01B9C9B5F0BC5DA891D6EB@dlee01.ent.ti.com>
On Sat, 4 Sep 2010 12:38:34 -0500
"Paulraj, Sandeep" <s-paulraj@ti.com> wrote:
> Scott,
>
> Is it ok if I add this to my tree?
Yes, once the whitespace is fixed.
>
> Its part of a 11 patch series and a total of some 20 patches submitted by Steve
>
>
> > ---
> > drivers/mtd/nand/nand_base.c | 7 +++++--
> > 1 files changed, 5 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> > index ed1c9c9..b2400dd 100644
> > --- a/drivers/mtd/nand/nand_base.c
> > +++ b/drivers/mtd/nand/nand_base.c
> > @@ -2653,8 +2653,11 @@ static struct nand_flash_dev
> > *nand_get_flash_type(struct mtd_info *mtd,
> > }
> >
> > if (!type) {
> > - printk(KERN_INFO "%s: unknown NAND device: Manufacturer ID:"
> > - " 0x%02x, Chip ID: 0x%02x\n", __func__,
> > + /* supress warning if there is no nand */
> > + if ((*maf_id != 0x00) && (*maf_id != 0xff) &&
> > + (dev_id != 0x00) && (dev_id != 0xff))
> > + printk(KERN_INFO "%s: unknown NAND device: "
> > + "Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", __func__,
> > *maf_id, dev_id);
> > return ERR_PTR(-ENODEV);
printk's continuation lines need one more tab.
-Scott
next prev parent reply other threads:[~2010-09-07 17:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-31 23:21 [U-Boot] [PATCH 00/11] ARMV7: OMAP: Add support for OMAP36XX/37XX, cleanup OMAP3 common code Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 01/11] ARMV7: OMAP3: Update CPU type detection for AM35XX/OMAP36XX/37XX Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 02/11] ARMV7: OMAP3: Add clock setup for OMAP36XX/37XX Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 03/11] ARMV7: OMAP3: Fix and clean up L2 cache enable/disable functions Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 04/11] ARMV7: OMAP3: Convert setup_auxcr() to pure asm Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 05/11] ARMV7: OMAP3: Apply Cortex-A8 errata workarounds only on affected revisions Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 06/11] ARMV7: OMAP3: Fix broken reset command on OMAP36XX/37XX and OMAP4 Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 07/11] ARMV7: OMAP3: Remove erroneous hard coded sdram setup for 128MB/bank Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 08/11] mtd: nand: honor CONFIG_SYS_NAND_QUIET_TEST with unknown NAND printk Steve Sakoman
2010-09-01 0:18 ` Paulraj, Sandeep
2010-09-01 16:26 ` Scott Wood
2010-09-01 16:43 ` Steve Sakoman
2010-09-01 17:55 ` Scott Wood
2010-09-02 15:33 ` [U-Boot] [PATCH V2 08/11] mtd: nand: supress 'unknown NAND' warning if no nand is found Steve Sakoman
2010-09-04 17:38 ` Paulraj, Sandeep
2010-09-04 20:16 ` Steve Sakoman
2010-09-07 17:37 ` Scott Wood [this message]
2010-09-07 21:27 ` Steve Sakoman
2010-09-05 10:59 ` Sergei Shtylyov
2010-09-05 21:37 ` Steve Sakoman
2010-09-07 17:37 ` Scott Wood
2010-08-31 23:21 ` [U-Boot] [PATCH 09/11] ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 10/11] ARMV7: OMAP3: Add support for Beagle xM Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 11/11] ARMV7: OMAP: Overo: Autodetect presence/absence of transceiver on mmc2 Steve Sakoman
2010-08-31 23:35 ` [U-Boot] [PATCH 00/11] ARMV7: OMAP: Add support for OMAP36XX/37XX, cleanup OMAP3 common code Steve Sakoman
2010-09-01 0:20 ` Paulraj, Sandeep
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100907123743.6ff8eeb2@schlenkerla.am.freescale.net \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox