From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Frysinger Date: Mon, 20 Sep 2010 17:44:38 -0400 Subject: [U-Boot] [PATCH v3] NET: add ENC28J60 driver using SPI framework In-Reply-To: <1284301429-7812-1-git-send-email-u-boot@emk-elektronik.de> References: <1284301429-7812-1-git-send-email-u-boot@emk-elektronik.de> Message-ID: <201009201744.39170.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de finally got around to testing this. seems like the init needs some work. if i power on the system (cold boot), boot Linux over the on-chip mac, and let Linux program the enc part, it works fine under Linux. then i do a software reset back into u-boot, it can use the enc fine too. but if i cold boot u-boot and try to use the enc part, i get: timeout waiting for CLKRDY enabling DEBUG doesnt show any additional output though. -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20100920/9b324d4a/attachment.pgp