From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Tue, 21 Sep 2010 16:40:37 +0200 Subject: [U-Boot] AT91: problems master vs. next In-Reply-To: <4C98A78D.7070407@emk-elektronik.de> References: <4C98A78D.7070407@emk-elektronik.de> Message-ID: <201009211640.37272.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Reinhard, On Tuesday 21 September 2010 14:39:41 Reinhard Meyer wrote: > Rebasing my current TOP9000 port on u-boot/next compiles > after defining CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR. > Code size increased heavyly from 223592 to 245544. Please note that this increase is not only because of the new ARM relocation support, but the environment rework done by Wolfgang: http://lists.denx.de/pipermail/u-boot/2010-July/074125.html As stated in this mail, the code size increase is typically 5...7KiB. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de