[U-Boot] u-boot USB status

[Marcel <korgull@home.nl>]

Hi Remy,

At this moment I only need the device support because the host connection is 
not always available on my designs. Host support is however also very 
interesting and I certainly will have a need for that as well at some point.

It's wonderful news that there's something available already and I will 
certainly check this out. Do have an idea for which board type this was 
implemented ?

Thanks a lot for your reply,
Marcel

> Hi Marcel,
> 
> 2010/9/17 Marcel <korgull@home.nl>:
> > Hi Damien,
> > 
> > Thanks for the info. I will check it out.
> > 
> > I'm also not sure if the SAM9 USB device support is available.
> > I actually did some work a while ago to make USB work for the SAM9 but
> > had to leave it in non-working condition at the time. If SAM9 USB is not
> > supported yet, I guess I best fix my code and contribute it.
> 
> Sam9 host controller support is already in the mainline for years.
> (sam9 uses the OHCI host)
> There is sam9 device support in the u-boot-usb branch but first the
> CDC branch need to be pushed to mainline during the next merge window
> (I hope).
> 
> Kind regards,
> 
> Remy