[U-Boot] [PATCH] mpc5xxx_fec: add call to reset_phy() after PHY initialization

[Wolfgang Denk <wd@denx.de>]

Dear Ben,

ping again...

In message <20100913093325.A8A8415242D@gemini.denx.de> I wrote:
> Dear Ben,
> 
> In message <1282208946-18823-1-git-send-email-yanok@emcraft.com> Ilya Yanok wrote:
> > Some boards need their board-specific PHY quirks to be called
> > to PHY to work normally. As mpc5xxx_fec driver uses on demand
> > PHY initialization and can even reinit PHY during normal operation
> > we can't count on reset_phy() call from arch/<arch>/lib/board.c
> > (it is most likely called _before_ we init the PHY from the
> > driver) so we need to add call to reset_phy() directly in the
> > driver.
> > 
> > Cc: Ben Warren <biggerbadderben@gmail.com>
> > Signed-off-by: Ilya Yanok <yanok@emcraft.com>
> > ---
> >  drivers/net/mpc5xxx_fec.c |    7 +++++++
> >  1 files changed, 7 insertions(+), 0 deletions(-)
> 
> Do you have any comments?


Please comment how to go on - this is a real problem that needs to be
fixed one way or another.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is more rational to sacrifice one life than six.
	-- Spock, "The Galileo Seven", stardate 2822.3