[U-Boot] ARMV7: OMAP3: Implement relocation for Overo

[Wolfgang Denk <wd@denx.de>]

Dear Steve Sakoman,

In message <1285867914.4705.145.camel@quadra> you wrote:
> This patch fixes the build breakage introduced by the recent relocation
> changes for ARMV7. It is based on the patch for Beagleboard.
> 
> Signed-off-by: Steve Sakoman <steve@sakoman.com>
> ---
> 
> diff --git a/board/overo/config.mk b/board/overo/config.mk
> index d372fd9..59b651f 100644
> --- a/board/overo/config.mk
> +++ b/board/overo/config.mk
> @@ -26,4 +26,4 @@
>  # (mem base + reserved)
>  
>  # For use with external or internal boots.
> -TEXT_BASE = 0x80e80000
> +TEXT_BASE = 0x80008000
> diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
> index daa4515..49a0b95 100644
> --- a/include/configs/omap3_overo.h
> +++ b/include/configs/omap3_overo.h
> @@ -324,4 +324,8 @@ extern unsigned int boot_flash_type;
>  
>  #endif /* (CONFIG_CMD_NET) */
>  
> +#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */

Please remove this line.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Morality is one thing.  Ratings are everything."
- A Network 23 executive on "Max Headroom"