[U-Boot] [PATCH v1] ppc44x: config GPIOs for USB on canyonlands board

[Rupjyoti Sarmah <rsarmah@amcc.com>]

The GPIO 16 and 19 reconfiguration should be done once USB is initialized.
So moved the reconfiguration to the USB init  function. 

Signed-off-by: Rupjyoti Sarmah <rsarmah@apm.com>
---
 board/amcc/canyonlands/canyonlands.c |   23 +++++++++++++----------
 1 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 158f7bb..09adc3b 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -195,16 +195,6 @@ int board_early_init_f(void)
 	mtdcr(AHB_TOP, 0x8000004B);
 	mtdcr(AHB_BOT, 0x8000004B);
 
-	if (pvr_460ex()) {
-		/*
-		 * Configure USB-STP pins as alternate and not GPIO
-		 * It seems to be neccessary to configure the STP pins as GPIO
-		 * input at powerup (perhaps while USB reset is asserted). So
-		 * we configure those pins to their "real" function now.
-		 */
-		gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
-		gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
-	}
 #endif
 
 	return 0;
@@ -222,6 +212,15 @@ int usb_board_init(void)
 	val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
 	out_8(&bcsr_data->usb_ctrl, val);
 
+	/*
+	 * Configure USB-STP pins as alternate and not GPIO
+	 * It seems to be neccessary to configure the STP pins as GPIO
+	 * input at powerup (perhaps while USB reset is asserted). So
+	 * we configure those pins to their "real" function now.
+	 */
+	gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+	gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+
 	return 0;
 }
 
@@ -236,6 +235,10 @@ int usb_board_stop(void)
 	val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
 	out_8(&bcsr_data->usb_ctrl, val);
 
+	/* Reconfigure USB-STP pins as input */
+	gpio_config(16, GPIO_IN , GPIO_SEL, GPIO_OUT_0);
+	gpio_config(19, GPIO_IN , GPIO_SEL, GPIO_OUT_0);
+
 	return 0;
 }
 
-- 
1.5.6.3