[U-Boot] U-boot hangs at command prompt if unattended for sometime (30 seconds)

[Marek Vasut <marek.vasut@gmail.com>]

Dne ?t 5. ??jna 2010 05:11:45 StephenPaulraj Chinnadurai-ERS,HCLTech napsal(a):
> Hi Marek,
> 
> I have modified the Voipac PXA270 u-boot source code for my customized
> board. Everything is working fine except suspend/resume. When in u-boot
> prompt, if unattended for some time (30 seconds), the u-boot hangs. The
> u-boot is not taking any input from the keyboard, the only way to resume
> the u-boot is through controller reset.

Does the CPU hang? or does it end in some other than svc mode ? or what ?
> 
> Which part of the u-boot source code I should concentrate/modify to come of
> this issue?

Hardware ...
> 
> Thanks and Regards
> Stephen Paulraj C
> 
> 
> 
> DISCLAIMER:
> ---------------------------------------------------------------------------
> --------------------------------------------
> 
> The contents of this e-mail and any attachment(s) are confidential and
> intended for the named recipient(s) only. It shall not attach any
> liability on the originator or HCL or its affiliates. Any views or
> opinions presented in this email are solely those of the author and may
> not necessarily reflect the opinions of HCL or its affiliates. Any form of
> reproduction, dissemination, copying, disclosure, modification,
> distribution and / or publication of this message without the prior
> written consent of the author of this e-mail is strictly prohibited. If
> you have received this email in error please delete it and notify the
> sender immediately. Before opening any mail and attachments please check
> them for viruses and defect.
> 
> ---------------------------------------------------------------------------
> --------------------------------------------