[U-Boot] Pull request - net

[Wolfgang Denk <wd@denx.de>]

Dear Ben Warren,

In message <4CB402A0.7040008@gmail.com> you wrote:
> 
> 
> Wolfgang,
> 
> The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
>    Wolfgang Denk (1):
>          Merge branch 'master' of git://git.denx.de/u-boot-x86
> 
> are available in the git repository at:
> 
>    git://git.denx.de/u-boot-net.git master
> 
> Andreas Bie?mann (2):
>        drivers/net/at91_emac.c: increase timeout for autonegotiation
>        drivers/net/at91_emac.c: change return values
> 
> Ben Gardiner (1):
>        davinci_emac: davinci_eth_set_mac_addr to ->write_hwaddr
> 
> Ben Warren (1):
>        Net: Remove redundant CONFIG_NET_MULTI directives
> 
> Ilya Yanok (1):
>        mpc5xxx_fec: add call to reset_phy() after PHY initialization
> 
> Joakim Tjernlund (4):
>        net: Fix faulty definition of uec_initialize()
>        UEC: Don't udelay needlessly
>        UEC PHY: Remove strange 0.5 sec delay
>        UEC PHY: Speed up initial PHY neg.
> 
> Michal Simek (2):
>        net: Fix emaclite driver to support little-endian microblaze
>        net: Move Emaclite to NET_MULTI
> 
> Peter Tyser (1):
>        rarp: Condtionally compile rarp support
> 
> Reinhard Meyer (1):
>        NET: add ENC28J60 driver using SPI framework
> 
> Reinhard Meyer (-VC) (1):
>        NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c
> 
> Thomas Chou (1):
>        smc91111: add write_hwaddr
> 
>   arch/arm/include/asm/arch-davinci/emac_defs.h |    1 -
>   arch/arm/lib/board.c                          |   19 -
>   board/davinci/common/misc.c                   |   41 +-
>   board/davinci/common/misc.h                   |    2 +-
>   board/davinci/da8xxevm/da830evm.c             |   12 +-
>   board/davinci/dm365evm/dm365evm.c             |    2 +-
>   board/davinci/dvevm/dvevm.c                   |    2 +-
>   board/davinci/sffsdr/sffsdr.c                 |    2 +-
>   board/davinci/sonata/sonata.c                 |    2 +-
>   common/cmd_net.c                              |    2 +
>   drivers/net/Makefile                          |    1 +
>   drivers/net/at91_emac.c                       |   20 +-
>   drivers/net/davinci_emac.c                    |   80 +-
>   drivers/net/enc28j60.c                        | 1548 ++++++++++++-------------
>   drivers/net/enc28j60.h                        |  251 ++++
>   drivers/net/enc28j60_lpc2292.c                |  983 ++++++++++++++++
>   drivers/net/mpc5xxx_fec.c                     |    7 +
>   drivers/net/smc91111.c                        |   40 +-
>   drivers/net/xilinx_emaclite.c                 |   88 +-
>   drivers/qe/uec.c                              |    4 +-
>   drivers/qe/uec_phy.c                          |   10 +-
>   include/config_cmd_all.h                      |    1 +
>   include/configs/SMN42.h                       |    2 +-
>   include/configs/lpc2292sodimm.h               |    2 +-
>   include/netdev.h                              |    4 +-
>   net/Makefile                                  |    2 +-
>   net/eth.c                                     |   16 +-
>   net/net.c                                     |   11 +-
>   28 files changed, 2192 insertions(+), 963 deletions(-)
>   create mode 100644 drivers/net/enc28j60.h
>   create mode 100644 drivers/net/enc28j60_lpc2292.c

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Too many people are ready to carry the stool when the piano needs  to
be moved.