[U-Boot] [PATCH 1/2 V3] mmc: add boundary check for mmc operation

[Wolfgang Denk <wd@denx.de>]

Dear Andy,

In message <2A3DCF3DA181AD40BDE86A3150B27B6B031606272A@dbde02.ent.ti.com> Sukumar Ghorai wrote:
...
> I found the problem. It's a eMMC size calculation is wrong and here is the
> fix I am sending as a patch too in my next email.
>
> From: Sukumar Ghorai <s-ghorai@ti.com>
> Date: Mon, 20 Sep 2010 18:29:29 +0530
> Subject: [PATCH 1/3] fix for eMMC capacity calculation
>
>   capacity of the eMMC device available in ext-CSD register only
>
> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
> ---
> drivers/mmc/mmc.c |   11 +++++++++++
>  1 files changed, 11 insertions(+), 0 deletions(-)

Is this patch on your queue?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Here's a fish hangs in the net like a poor man's right in  the  law.
'Twill hardly come out."     - Shakespeare, Pericles, Act II, Scene 1