[U-Boot] [PATCH v2 1/5] Build: Add "board options" column to boards.cfg

[Marek Vasut <marek.vasut@gmail.com>]

Dne Ne 17. ??jna 2010 01:57:38 Wolfgang Denk napsal(a):
> From: Marek Vasut <marek.vasut@gmail.com>
> 
> There are some boards where it's currently not possible to detect all
> board information at runtime, therefore a new column was added to
> boards.cfg .
> 
> This column can contain multiple options: a board configuration name,
> optionally followed by a colon (':') and a list of options, which are
> separated by comma (',').
> 
> In case of simple options like '256M_U_BOOT', these expand to
> "#define CONFIG_MK_256M_U_BOOT 1" in config.h . In case of
> assignments like 'RAM=8192', these expand to "#define CONFIG_MK_RAM
> 8192" in config.h .
> 

Didn't you say CONFIG_MK_ was being changed to plain CONFIG_ ? You left 
CONFIG_MK_RAM above.

Cheers

> Example:
> 
> 	FOO:HAS_BAR,BAZ=64
> 
> means:
> 	- the name of the board config file is include/configs/FOO.h
> 	- the generated file include/config.h will contain these
> 	  lines:
> 
> 		#define CONFIG_HAS_BAR  1
> 		#define CONFIG_BAZ  64
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> 
> [wd at denx.de: edited commit message; added code to deal with an
> optional board configuration name]
> 
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> ---
>  boards.cfg |    4 ++--
>  mkconfig   |   34 +++++++++++++++++++++++++++++-----
>  2 files changed, 31 insertions(+), 7 deletions(-)
> 
> diff --git a/boards.cfg b/boards.cfg
> index 91d75d3..1f44525 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -17,8 +17,8 @@
>  #
>  #	:.,$! sort -f -k2,2 -k3,3 -k6,6 -k5,5 -k1,1
>  #
> -# Target	ARCH	CPU		Board name	Vendor		SoC
> -##########################################################################
> # +# Target	ARCH	CPU		Board name	Vendor		SoC		Options
> +##########################################################################
> #####################
> 
>  qong		arm	arm1136		-		davedenx	mx31
>  mx31ads		arm	arm1136		-		freescale	mx31
> diff --git a/mkconfig b/mkconfig
> index b661071..f3054ce 100755
> --- a/mkconfig
> +++ b/mkconfig
> @@ -5,7 +5,7 @@
>  #
>  # Parameters:  Target  Architecture  CPU  Board [VENDOR] [SOC]
>  #
> -# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
> +# (C) 2002-2010 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
>  #
> 
>  APPEND=no	# Default: Create new config file
> @@ -17,6 +17,7 @@ cpu=""
>  board=""
>  vendor=""
>  soc=""
> +options=""
> 
>  if [ \( $# -eq 2 \) -a \( "$1" = "-A" \) ] ; then
>  	# Automatic mode
> @@ -41,11 +42,12 @@ while [ $# -gt 0 ] ; do
>  done
> 
>  [ $# -lt 4 ] && exit 1
> -[ $# -gt 6 ] && exit 1
> +[ $# -gt 7 ] && exit 1
> 
> +# Strip all options and/or _config suffixes
>  CONFIG_NAME="${1%_config}"
> 
> -[ "${BOARD_NAME}" ] || BOARD_NAME="${CONFIG_NAME}"
> +[ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}"
> 
>  arch="$2"
>  cpu="$3"
> @@ -56,13 +58,34 @@ else
>  fi
>  [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
>  [ $# -gt 5 ] && [ "$6" != "-" ] && soc="$6"
> +[ $# -gt 6 ] && [ "$7" != "-" ] && {
> +	# check if we have a board config name in the options field
> +	# the options field mave have a board config name and a list
> +	# of options, both separated by a colon (':'); the options are
> +	# separated by commas (',').
> +	#
> +	# Check for board name
> +	tmp="${7%:*}"
> +	if [ "$tmp" ] ; then
> +		CONFIG_NAME="$tmp"
> +	fi
> +	# Check if we only have a colon...
> +	if [ "${tmp}" != "$7" ] ; then
> +		options=${7#*:}
> +		TARGETS="`echo ${options} | sed 's:,: :g'` ${TARGETS}"
> +	fi
> +}
> 
>  if [ "${ARCH}" -a "${ARCH}" != "${arch}" ]; then
>  	echo "Failed: \$ARCH=${ARCH}, should be '${arch}' for ${BOARD_NAME}" 1>&2
>  	exit 1
>  fi
> 
> -echo "Configuring for ${BOARD_NAME} board..."
> +if [ "$options" ] ; then
> +	echo "Configuring for ${BOARD_NAME} - Board: ${CONFIG_NAME}, Options:
> ${options}" +else
> +	echo "Configuring for ${BOARD_NAME} board..."
> +fi
> 
>  #
>  # Create link to architecture specific headers
> @@ -126,7 +149,8 @@ fi
>  echo "/* Automatically generated - do not edit */" >>config.h
> 
>  for i in ${TARGETS} ; do
> -	echo "#define CONFIG_MK_${i} 1" >>config.h ;
> +	i="`echo ${i} | sed '/=/ {s/=/\t/;q } ; { s/$/\t1/ }'`"
> +	echo "#define CONFIG_MK_${i}" >>config.h ;
>  done
> 
>  cat << EOF >> config.h