From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sat, 30 Oct 2010 20:01:36 +0200 Subject: [U-Boot] arm: wrong Relocation and not cleared BSS In-Reply-To: <4CCC5406.6050600@free.fr> References: <4CCC18E7.8080708@ahsoftware.de> <4CCC1F6C.7040603@free.fr> <20101030150050.03E811522C0@gemini.denx.de> <4CCC5406.6050600@free.fr> Message-ID: <20101030180136.D13FF135EB7@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Albert ARIBAUD, In message <4CCC5406.6050600@free.fr> you wrote: > > > > U-Boot 2010.12-rc1-00026-g0c0892b-dirty (Oct 30 2010 - 16:55:43) > > I assume this is the latest master, right? > > > U-Boot code: 81200000 -> 812291A0 BSS: -> 812322A0 > > > relocation Offset is: 00dbd000 > > > Now running in RAM - U-Boot at: 81fbd000 > > > ## nand_chip: 81fe91a0 > > This is consistent. What commit exactly did you compile, and what > toolchain did you use? I used ELDK 4.2 in the arm-linux- setup, and the commit is visible in the version line above: it's 0c0892b (the "dirty" comes from adding the DEBUG in board.c and the printf() in nand.c Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Keep your eyes wide open before marriage, half shut afterwards. -- Benjamin Franklin