From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] various at91 patches to make some boards compilable again
Date: Mon, 01 Nov 2010 10:30:59 +0100 [thread overview]
Message-ID: <20101101093059.AB0321354EC@gemini.denx.de> (raw)
In-Reply-To: <201011010950.05938.alexander.stein@systec-electronic.com>
Dear Alexander Stein,
In message <201011010950.05938.alexander.stein@systec-electronic.com> you wrote:
>
> Well, I have only occasional access to at91sam9g20ek and at91sam9263ek atm.
If U-Boot has been tested on these boards, you can list yourself as
maintainer. If any later changes should require testing and you find
yourself in a position that you cannot do that any more (for whatever
reason), we can still orphan or even remove these boards.
> All other boards were just done by adjusting the same things. I'm unsure how
> well I could maintain those boards.
Agreed.
> > But if we receive no positive test reports in some time, those boards
> > ultimately have to be deleted.
> >
> > I can only test on an at91sam9xe-ek.
Well, I suggest we add respective notes to the MAINTAINERS file: in
addition to the "orphaned" group of boards, we could add an "orphaned
/ untested / remove-list" group entry.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"At least they're __________EXPERIENCED incompetents"
next prev parent reply other threads:[~2010-11-01 9:30 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-01 8:29 [U-Boot] various at91 patches to make some boards compilable again Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 01/11] at91sam9260: Replace PHYS_SDRAM with CONFIG_SYS_SDRAM_BASE Alexander Stein
2010-11-01 9:33 ` Wolfgang Denk
2010-11-01 8:29 ` [U-Boot] [PATCH 02/11] at91: Add USART & DBGU base address defines Alexander Stein
2010-11-01 10:57 ` Andreas Bießmann
2010-11-01 11:05 ` Alexander Stein
2010-11-01 11:26 ` Andreas Bießmann
2010-11-01 12:17 ` Reinhard Meyer
2010-11-02 10:42 ` Reinhard Meyer
2010-11-02 14:11 ` [U-Boot] [RFC] AT91 cleanup, was: " Reinhard Meyer
2010-11-03 7:18 ` Alexander Stein
2010-11-03 9:17 ` Reinhard Meyer
2010-11-03 9:29 ` Andreas Bießmann
2010-11-03 10:03 ` Reinhard Meyer
2010-11-03 10:25 ` Andreas Bießmann
2010-11-03 10:20 ` [U-Boot] [PATCH 1/2] [RFC] AVR32: move memory-map.h to hardware.h Andreas Bießmann
2010-11-03 15:02 ` Reinhard Meyer
2010-11-03 15:37 ` Reinhard Meyer
2010-11-05 9:15 ` [U-Boot] [PATCH v2 0/2] adopt avr32 to latest changes in u-boot-atmel/at91cleanup-rework Andreas Bießmann
2010-11-05 9:15 ` [U-Boot] [PATCH v2 1/2] avr32: rename memory-map.h -> hardware.h Andreas Bießmann
2011-04-11 8:55 ` Reinhard Meyer
2010-11-05 9:15 ` [U-Boot] [PATCH v2 2/2] avr32: fixup definitions to ATMEL_BASE_xxx Andreas Bießmann
2010-11-05 10:34 ` Reinhard Meyer
2011-04-11 8:58 ` Reinhard Meyer
2010-11-03 10:20 ` [U-Boot] [PATCH 2/2] [RFC] drivers:atmel-related: fixup include to hardware.h Andreas Bießmann
2010-11-03 15:04 ` Reinhard Meyer
2010-11-01 8:29 ` [U-Boot] [PATCH 03/11] at91: Use AT91_USART0_BASE instead of AT91_USART0 Alexander Stein
2010-11-01 10:56 ` Andreas Bießmann
2010-11-01 8:29 ` [U-Boot] [PATCH 04/11] at91sam9260ek: Convert to SoC Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 05/11] at91: Fix pdc register names and add some defines Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 06/11] at91: Add defines for spi SoC access Alexander Stein
2010-11-01 8:43 ` Reinhard Meyer
2010-11-01 8:52 ` Alexander Stein
2010-11-01 9:36 ` Wolfgang Denk
2010-11-01 12:31 ` Reinhard Meyer
2010-11-01 13:34 ` Alexander Stein
2010-11-04 16:07 ` Thomas Petazzoni
2010-11-01 8:29 ` [U-Boot] [PATCH 07/11] at91: Add spi base addresses Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 08/11] atmel_dataflash: Update to SoC access Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 09/11] at91sam9261ek: make compilable again Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 10/11] at91sam9263ek: " Alexander Stein
2010-11-01 9:39 ` Wolfgang Denk
2010-11-01 8:29 ` [U-Boot] [PATCH 11/11] at91cap9adk: " Alexander Stein
2010-11-01 8:40 ` [U-Boot] various at91 patches to make some boards " Reinhard Meyer
2010-11-01 8:50 ` Alexander Stein
2010-11-01 9:30 ` Wolfgang Denk [this message]
2010-11-01 11:09 ` Andreas Bießmann
2011-01-27 19:18 ` Remy Bohmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101101093059.AB0321354EC@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox