From: Alexander Stein <alexander.stein@systec-electronic.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 02/11] at91: Add USART & DBGU base address defines
Date: Mon, 1 Nov 2010 12:05:41 +0100 [thread overview]
Message-ID: <201011011206.06458.alexander.stein@systec-electronic.com> (raw)
In-Reply-To: <9BA22C37-6EAE-478E-9FE2-3E98695C4D5F@googlemail.com>
Dear Andreas,
On Monday 01 November 2010, 11:57:14 Andreas Bie?mann wrote:
> Am 01.11.2010 um 09:29 schrieb Alexander Stein:
> > Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
> > ---
> > arch/arm/include/asm/arch-at91/at91cap9.h | 12 ++++++++----
> > arch/arm/include/asm/arch-at91/at91sam9260.h | 7 +++++++
> > arch/arm/include/asm/arch-at91/at91sam9261.h | 4 ++++
> > arch/arm/include/asm/arch-at91/at91sam9263.h | 3 +++
> > arch/arm/include/asm/arch-at91/at91sam9g45.h | 5 +++++
> > arch/arm/include/asm/arch-at91/at91sam9rl.h | 4 ++++
> > 6 files changed, 31 insertions(+), 4 deletions(-)
> >
> > --- a/arch/arm/include/asm/arch-at91/at91sam9g45.h
> > +++ b/arch/arm/include/asm/arch-at91/at91sam9g45.h
> > @@ -51,9 +51,14 @@
> > #define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */
> > #define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */
> >
> > +#define AT91_USART0_BASE 0xfff8c000
> > +#define AT91_USART1_BASE 0xfff90000
> > +#define AT91_USART2_BASE 0xfff94000
> > +#define AT91_USART3_BASE 0xfff98000
> > #define AT91_EMAC_BASE 0xfffbc000
> > #define AT91_SMC_BASE 0xffffe800
> > #define AT91_MATRIX_BASE 0xffffea00
> > +#define AT91_DBGU_BASE 0xffffee00
> > #define AT91_PIO_BASE 0xfffff200
> > #define AT91_PMC_BASE 0xfffffc00
> > #define AT91_RSTC_BASE 0xfffffd00
> > diff --git a/arch/arm/include/asm/arch-at91/at91sam9rl.h
> > b/arch/arm/include/asm/arch-at91/at91sam9rl.h index 8eb0d4f..ffa6687
> > 100644
> >
> >
> > --- a/arch/arm/include/asm/arch-at91/at91sam9rl.h
> > +++ b/arch/arm/include/asm/arch-at91/at91sam9rl.h
> > @@ -44,6 +44,10 @@
> > #define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
> > #define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0)
*/
> >
> > +#define AT91_US0_BASE 0xfffb0000
> > +#define AT91_US1_BASE 0xfffb4000
> > +#define AT91_US2_BASE 0xfffb8000
> > +#define AT91_US3_BASE 0xfffbc000
> > #define AT91_SDRAMC_BASE 0xffffea00
> > #define AT91_SMC_BASE 0xffffec00
> > #define AT91_MATRIX_BASE 0xffffee00
>
> can we just use one naming scheme here? I dunno whether it should be
> AT91_USx or AT91_USARTx but it should be the same in any case.
Yes, sure. I justed copied the dfine and reworded it to match the
AT91_$COMPONENT_BASE scheme. Always using USARTx is fine though.
Best regards,
Alexander Stein
next prev parent reply other threads:[~2010-11-01 11:05 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-01 8:29 [U-Boot] various at91 patches to make some boards compilable again Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 01/11] at91sam9260: Replace PHYS_SDRAM with CONFIG_SYS_SDRAM_BASE Alexander Stein
2010-11-01 9:33 ` Wolfgang Denk
2010-11-01 8:29 ` [U-Boot] [PATCH 02/11] at91: Add USART & DBGU base address defines Alexander Stein
2010-11-01 10:57 ` Andreas Bießmann
2010-11-01 11:05 ` Alexander Stein [this message]
2010-11-01 11:26 ` Andreas Bießmann
2010-11-01 12:17 ` Reinhard Meyer
2010-11-02 10:42 ` Reinhard Meyer
2010-11-02 14:11 ` [U-Boot] [RFC] AT91 cleanup, was: " Reinhard Meyer
2010-11-03 7:18 ` Alexander Stein
2010-11-03 9:17 ` Reinhard Meyer
2010-11-03 9:29 ` Andreas Bießmann
2010-11-03 10:03 ` Reinhard Meyer
2010-11-03 10:25 ` Andreas Bießmann
2010-11-03 10:20 ` [U-Boot] [PATCH 1/2] [RFC] AVR32: move memory-map.h to hardware.h Andreas Bießmann
2010-11-03 15:02 ` Reinhard Meyer
2010-11-03 15:37 ` Reinhard Meyer
2010-11-05 9:15 ` [U-Boot] [PATCH v2 0/2] adopt avr32 to latest changes in u-boot-atmel/at91cleanup-rework Andreas Bießmann
2010-11-05 9:15 ` [U-Boot] [PATCH v2 1/2] avr32: rename memory-map.h -> hardware.h Andreas Bießmann
2011-04-11 8:55 ` Reinhard Meyer
2010-11-05 9:15 ` [U-Boot] [PATCH v2 2/2] avr32: fixup definitions to ATMEL_BASE_xxx Andreas Bießmann
2010-11-05 10:34 ` Reinhard Meyer
2011-04-11 8:58 ` Reinhard Meyer
2010-11-03 10:20 ` [U-Boot] [PATCH 2/2] [RFC] drivers:atmel-related: fixup include to hardware.h Andreas Bießmann
2010-11-03 15:04 ` Reinhard Meyer
2010-11-01 8:29 ` [U-Boot] [PATCH 03/11] at91: Use AT91_USART0_BASE instead of AT91_USART0 Alexander Stein
2010-11-01 10:56 ` Andreas Bießmann
2010-11-01 8:29 ` [U-Boot] [PATCH 04/11] at91sam9260ek: Convert to SoC Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 05/11] at91: Fix pdc register names and add some defines Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 06/11] at91: Add defines for spi SoC access Alexander Stein
2010-11-01 8:43 ` Reinhard Meyer
2010-11-01 8:52 ` Alexander Stein
2010-11-01 9:36 ` Wolfgang Denk
2010-11-01 12:31 ` Reinhard Meyer
2010-11-01 13:34 ` Alexander Stein
2010-11-04 16:07 ` Thomas Petazzoni
2010-11-01 8:29 ` [U-Boot] [PATCH 07/11] at91: Add spi base addresses Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 08/11] atmel_dataflash: Update to SoC access Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 09/11] at91sam9261ek: make compilable again Alexander Stein
2010-11-01 8:29 ` [U-Boot] [PATCH 10/11] at91sam9263ek: " Alexander Stein
2010-11-01 9:39 ` Wolfgang Denk
2010-11-01 8:29 ` [U-Boot] [PATCH 11/11] at91cap9adk: " Alexander Stein
2010-11-01 8:40 ` [U-Boot] various at91 patches to make some boards " Reinhard Meyer
2010-11-01 8:50 ` Alexander Stein
2010-11-01 9:30 ` Wolfgang Denk
2010-11-01 11:09 ` Andreas Bießmann
2011-01-27 19:18 ` Remy Bohmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201011011206.06458.alexander.stein@systec-electronic.com \
--to=alexander.stein@systec-electronic.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox