From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Tue, 16 Nov 2010 23:02:48 +0100 Subject: [U-Boot] [PATCH 2/2][v2] Add readme of how to boot from espi flash for p4080ds. In-Reply-To: <20101116155432.585fa514@udp111988uds.am.freescale.net> References: <1289897403-24602-1-git-send-email-b21989@freescale.com> <20101116103443.A36F114EA7E@gemini.denx.de> <20101116155432.585fa514@udp111988uds.am.freescale.net> Message-ID: <20101116220249.0772C14EA7E@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Scott Wood, In message <20101116155432.585fa514@udp111988uds.am.freescale.net> you wrote: > > > Can you not provide a plain and simple AUTOMATIC way to get this > > result? some plain stupid command line tool? Something that works as > > a simple "make XXX" ? So it can be scripted / automatized / used? > > Yes, a simple C tool to take an existing PBL or RCW dump and "espi-ize" > it into a PBL dump would be nice. The user will still need to acquire > the existing RCW manually. This only needs to be done once on a board; > it's not part of building a U-Boot image. If this only needs to be done once on a board, then why cannot it be included in U-Boot with the configuration for this specific board? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Intelligence without character is a dangerous thing." - G. Steinem