[U-Boot] [PATCH] DaVinci DM355: Fix for ARM Relocation support

[U-Boot] [PATCH] DaVinci DM355: Fix for ARM Relocation support

[s-paulraj at ti.com]

From: Sandeep Paulraj <s-paulraj@ti.com>

Fix for ARM Relocation support


Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
---
 include/configs/davinci_dm355evm.h |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
index 8a69052..90f8e7c 100644
--- a/include/configs/davinci_dm355evm.h
+++ b/include/configs/davinci_dm355evm.h
@@ -189,4 +189,10 @@
 #define MTDPARTS_DEFAULT	\
 	"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
 
+#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		\
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */
-- 
1.6.0.4

[U-Boot] [PATCH] DaVinci DM355: Fix for ARM Relocation support

[Paulraj, Sandeep]

> 
> From: Sandeep Paulraj <s-paulraj@ti.com>
> 
> Fix for ARM Relocation support
> 
> 
> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
> ---
>  include/configs/davinci_dm355evm.h |    6 ++++++
>  1 files changed, 6 insertions(+), 0 deletions(-)
> 
> diff --git a/include/configs/davinci_dm355evm.h
> b/include/configs/davinci_dm355evm.h
> index 8a69052..90f8e7c 100644
> --- a/include/configs/davinci_dm355evm.h
> +++ b/include/configs/davinci_dm355evm.h
> @@ -189,4 +189,10 @@
>  #define MTDPARTS_DEFAULT	\
>  	"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
> 
> +#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
> +
> +#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_SP_ADDR		\
> +	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
> +
>  #endif /* __CONFIG_H */
> --
> 1.6.0.4


I have sent three patches.

Is it OK if I send a pull request immediately?

Regards,
Sandeep

[U-Boot] [PATCH] DaVinci DM355: Fix for ARM Relocation support

[Wolfgang Denk]

Dear "Paulraj, Sandeep",

In message <0554BEF07D437848AF01B9C9B5F0BC5DBD4FAD87@dlee01.ent.ti.com> you wrote:
> 
> I have sent three patches.
> 
> Is it OK if I send a pull request immediately?

under normal condistions we should wait a couple of days. But in this
specific case your patches un-break boards, so they are obvious
improvements and pretty urgent as well.  This is reason enough toi
shorten the time limits.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
At the source of every error which is blamed on the computer you will
find at least two human errors, including the error of blaming it  on
the computer.

[U-Boot] [PATCH] DaVinci DM355: Fix for ARM Relocation support

[Wolfgang Denk]

Dear s-paulraj at ti.com,

In message <1290901789-6744-1-git-send-email-s-paulraj@ti.com> you wrote:
> 
> Fix for ARM Relocation support
> 
> 
> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
> ---
>  include/configs/davinci_dm355evm.h |    6 ++++++
>  1 files changed, 6 insertions(+), 0 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Fascinating is a word I use for the unexpected.
	-- Spock, "The Squire of Gothos", stardate 2124.5