From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Wed, 22 Dec 2010 09:44:37 +0100 Subject: [U-Boot] [PATCH V3 1/6] tqm85xx: create fixed_sdram() to do sdram setup In-Reply-To: <98E272C4-45A0-44F0-98C1-4000CE1CCD02@kernel.crashing.org> References: <1292627879-9027-1-git-send-email-beckyb@kernel.crashing.org> <1292627879-9027-2-git-send-email-beckyb@kernel.crashing.org> <98E272C4-45A0-44F0-98C1-4000CE1CCD02@kernel.crashing.org> Message-ID: <201012220944.38183.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tuesday 21 December 2010 18:52:30 Kumar Gala wrote: > On Dec 17, 2010, at 5:17 PM, Becky Bruce wrote: > > Also, change this code to use phys_size_t instead of long int. > > Using common naming for this function will enable us to use the common > > initdram() for 85xx going forward. Other than the type change, > > this is just a code rearrange. > > > > Signed-off-by: Becky Bruce > > --- > > board/tqc/tqm85xx/sdram.c | 37 +++++++++++++++++++++++-------------- > > 1 files changed, 23 insertions(+), 14 deletions(-) > > Stefan, Wolfgang, > > Any comment as TQM85xx maintainers Looks good to me, thanks: Acked-by: Stefan Roese Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de