[U-Boot] [PATCH 2/2] powerpc/85xx: Add Support for Freescale P1014 Processor

[Wolfgang Denk <wd@denx.de>]

Dear Kumar Gala,

In message <1295023271-11897-2-git-send-email-galak@kernel.crashing.org> you wrote:
> From: Poonam Aggrwal <poonam.aggrwal@freescale.com>
> 
> The P1014 is similar to the P1010 processor with the following differences:
> 
> - 16bit DDR with ECC. (P1010 has 32bit DDR w/o ECC)
> - no eCAN interface. (P1010 has 2 eCAN interfaces)
> - Two SGMII interface (P1010 has 3 SGMII)
> - No secure boot
...
> --- a/arch/powerpc/include/asm/config.h
> +++ b/arch/powerpc/include/asm/config.h
> @@ -69,7 +69,7 @@
>  
>  /* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
>  #if defined(CONFIG_TSEC_ENET) && \
> -    (defined(CONFIG_P1010) || \
> +    (defined(CONFIG_P1010) || defined(CONFIG_P1014) || \
>       defined(CONFIG_P1020) || defined(CONFIG_P1011))

Please sort list.

> diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
> index 931cc71..d2b0cde 100644
> --- a/drivers/misc/fsl_law.c
> +++ b/drivers/misc/fsl_law.c
> @@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
>        defined(CONFIG_MPC8641) || defined(CONFIG_MPC8610)
>  #define FSL_HW_NUM_LAWS 10
>  #elif defined(CONFIG_MPC8536) || defined(CONFIG_MPC8572) || \
> -      defined(CONFIG_P1010) || \
> +      defined(CONFIG_P1010) || defined(CONFIG_P1014) || \
>        defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
>        defined(CONFIG_P1012) || defined(CONFIG_P1021) || \
>        defined(CONFIG_P1013) || defined(CONFIG_P1022) || \

Ditto.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Horses just naturally have mohawk haircuts.