[U-Boot] Trouble running hello_world

[Wolfgang Denk <wd@denx.de>]

Dear Alfred Morgan,

In message <30ADA4E9-4366-4C21-A901-55D23C87E829@54.org> you wrote:
> 
> I am having trouble executing anything using U-Boot.  I have read the
> U-Boot README and Manual.  I have also tried to following the steps on
> plugcomputer.org's wiki.  I was feeling like I was beginning to get a
> clue but then I couldn't get anything to work.  I figured a good place
> to start is trying to execute the u-boot hello_world standalone program
> but I couldn't even get that to work.
...
> And that is it.  The plug sits there with no further output to the
> serial console.  I've also tried "tftp 0x6400000 hello_world.bin" and
> "go 0x6400004" (like the manual says to start 4 bytes from start in
> section 5.12.1) but still, same boring results.  I've also tried
> 0xC100004 with the loads method just in case, but still nothing.

Did you read
http://www.denx.de/wiki/view/DULG/MyStandaloneProgramDoesNotWork

?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
People have one thing in common: they are all different.