From mboxrd@z Thu Jan  1 00:00:00 1970
From: jacopo mondi <j.mondi@voltaelectronics.com>
Date: Mon, 7 Feb 2011 18:30:02 +0100
Subject: [U-Boot] BeagleBoard-xM: Ethernet over USB supported ?
In-Reply-To: <AANLkTi=2NTikxQaJZWjia_vE17Yi9kamtTRrhbTf7DpT@mail.gmail.com>
References: <AANLkTimYCT2V+Dz2rVpKLnSbqHcc=4KO3givXuwjmQnh@mail.gmail.com>
	<4D4D5944.7020508@ahsoftware.de>
	<AANLkTi=2NTikxQaJZWjia_vE17Yi9kamtTRrhbTf7DpT@mail.gmail.com>
Message-ID: <20110207183002.100fd083@BlackBox>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Since it was one of the purposed GSoc project, knowing something more
would be interesting for someone.
Could you please provide more information, or maybe give a hint
about who worked on that?

thanks..

On Mon, 7 Feb 2011 10:12:53 +0530 "Gadiyar, Anand"
<gadiyar@ti.com> wrote:

> There was some work done on getting EHCI working - I'll see if I can
> poke the chaps that worked on it and get that posted here.
> 
> However, in addition to the omap-ehci support, won't we need
> a driver for the SMSC LAN9514 ethernet controller on the board?
> It sure would be useful to have this - the pandaboard also has the
> same chip, so it would be useful there as well.
> 
> - Anand
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot