[U-Boot] [PATCH] : add canyonlands RAM-boot target

[Stefan Roese <sr@denx.de>]

On Sunday 06 March 2011 13:13:30 Fawaz wrote:
>    This patch adds another build target for the AMCC Canyonlands
> PPC460Ex eval board. Using JTAG debugger(e.g. BDI2000/3000) configured
> to setup the SDRAM.
>   here are TLB entries required by RAM-u-boot (for BDI2000/3000):
>   WTLB   0x00000095  0x0000003F  ;SDRAM 256MB @ 0x00000000
>   WTLB      0xE0000075  0x4E00003F
>   WTLB      0xE1000005  0x4E10001B
>   WTLB      0xE3000054  0x4000003F
>   keep SDRAM configuration part as it's.
> 
>   Signed-off-by: Fawaz Gaili <fwazgai@gmail.com>
>   Cc: Stefan Roese <sr@denx.de>
>   Cc: Wolfgang Denk <wd@denx.de>
>   Cc: Felix Radensky <felix@embedded-sol.com>

Your patch is line wrapped and can't be applied. Please fix this in your 
mailer, or even better, use "git send-email" to send your patches.

And did you check if this RAM-booting target also works when it is 
loaded/started via an already running U-Boot (instead of via the JTAG 
debugger)?

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de