[U-Boot] [PATCH]: add canyonlands RAM-boot target

[Stefan Roese <sr@denx.de>]

Hi Fawaz,

On Sunday 13 March 2011 17:20:31 Fawaz wrote:
>     This Patch adds another build target for the AMCC Canyonlands
> [PPC460Ex] eval board, this target can be used to do NAND flash or NOR
> flash programming in a virgin board using u-boot commands. Using JTAG
> debugger(e.g. BDI2000/3000) configured to setup the SDRAM.
>      here are TLB entries required to load RAM-u-boot (for BDI2000/3000):
>      WTLB   0x00000095  0x0000003F  ;SDRAM 256MB @ 0x00000000
>      WTLB      0xE1000005  0x4E10001B
> 
>      do SDRAM configuration.
> 
>      Then do the following usin JTAG emulator:
>      460EX>load 0x01000000 u-boot.bin bin
>      460EX>go

This patch is still line-wrapped. I tried to manually fix this, but it's quite 
complex and could introduce some errors. So, please fix this in your mailer, 
or even better, use "git send-email" to send your patches.

Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de