From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Wed, 13 Apr 2011 10:39:27 +0200 Subject: [U-Boot] [PATCH]: add canyonlands RAM-boot target In-Reply-To: <4D7CEECF.3010908@gmail.com> References: <4D7CEECF.3010908@gmail.com> Message-ID: <201104131039.28017.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fawaz, On Sunday 13 March 2011 17:20:31 Fawaz wrote: > This Patch adds another build target for the AMCC Canyonlands > [PPC460Ex] eval board, this target can be used to do NAND flash or NOR > flash programming in a virgin board using u-boot commands. Using JTAG > debugger(e.g. BDI2000/3000) configured to setup the SDRAM. > here are TLB entries required to load RAM-u-boot (for BDI2000/3000): > WTLB 0x00000095 0x0000003F ;SDRAM 256MB @ 0x00000000 > WTLB 0xE1000005 0x4E10001B > > do SDRAM configuration. > > Then do the following usin JTAG emulator: > 460EX>load 0x01000000 u-boot.bin bin > 460EX>go This patch is still line-wrapped. I tried to manually fix this, but it's quite complex and could introduce some errors. So, please fix this in your mailer, or even better, use "git send-email" to send your patches. Thanks. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de