* [U-Boot] [PATCH] xilinx_ppc_boards: Change address of RESET_VECTOR
@ 2011-01-12 9:14 Ricardo Ribalda Delgado
2011-01-19 7:18 ` Wolfgang Denk
2011-04-21 9:26 ` Stefan Roese
0 siblings, 2 replies; 3+ messages in thread
From: Ricardo Ribalda Delgado @ 2011-01-12 9:14 UTC (permalink / raw)
To: u-boot
Old address of RESET_VECTOR were overwritten by the bss sector, making
impossible its run from xmd.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
boards.cfg | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/boards.cfg b/boards.cfg
index 94b8745..2ba603d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -675,9 +675,9 @@ yellowstone powerpc ppc4xx yosemite amcc
yosemite powerpc ppc4xx yosemite amcc - yosemite:YOSEMITE
yucca powerpc ppc4xx - amcc
AP1000 powerpc ppc4xx ap1000 amirix
-fx12mm powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o
+fx12mm powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,INIT_TLB=board/xilinx/ppc405-generic/init.o
fx12mm_flash powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o
-v5fx30teval powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o
+v5fx30teval powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o
v5fx30teval_flash powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o
CRAYL1 powerpc ppc4xx L1 cray
CATcenter powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1
@@ -736,11 +736,11 @@ p3p440 powerpc ppc4xx - prodriv
KAREF powerpc ppc4xx karef sandburst
METROBOX powerpc ppc4xx metrobox sandburst
xpedite1000 powerpc ppc4xx - xes
-ml507 powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o
+ml507 powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o
ml507_flash powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o
-xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC
+xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000
xilinx-ppc405-generic_flash powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC
-xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1
+xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1
xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC
rsk7203 sh sh2 rsk7203 renesas -
mpr2 sh sh3 mpr2 - -
--
1.7.2.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] xilinx_ppc_boards: Change address of RESET_VECTOR
2011-01-12 9:14 [U-Boot] [PATCH] xilinx_ppc_boards: Change address of RESET_VECTOR Ricardo Ribalda Delgado
@ 2011-01-19 7:18 ` Wolfgang Denk
2011-04-21 9:26 ` Stefan Roese
1 sibling, 0 replies; 3+ messages in thread
From: Wolfgang Denk @ 2011-01-19 7:18 UTC (permalink / raw)
To: u-boot
Dear Ricardo Ribalda Delgado,
In message <1294823682-12502-1-git-send-email-ricardo.ribalda@gmail.com> you wrote:
> Old address of RESET_VECTOR were overwritten by the bss sector, making
> impossible its run from xmd.
>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
I would like to minimize the configuration information present in
boards.cfg; the current state resulted just from the attempt to
minimize changes when converting to from Makefile to boards.cfg, but
that should not be the final state.
When you touch all of this anyway (and re-test it, obviously), can you
then please take the chance and move all tis stuff from boards.cfg
into your respective board config files, where it aktucally belongs?
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The best things in life are for a fee.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] xilinx_ppc_boards: Change address of RESET_VECTOR
2011-01-12 9:14 [U-Boot] [PATCH] xilinx_ppc_boards: Change address of RESET_VECTOR Ricardo Ribalda Delgado
2011-01-19 7:18 ` Wolfgang Denk
@ 2011-04-21 9:26 ` Stefan Roese
1 sibling, 0 replies; 3+ messages in thread
From: Stefan Roese @ 2011-04-21 9:26 UTC (permalink / raw)
To: u-boot
On Wednesday 12 January 2011 10:14:42 Ricardo Ribalda Delgado wrote:
> Old address of RESET_VECTOR were overwritten by the bss sector, making
> impossible its run from xmd.
Applied to u-boot-ppc4xx/master. Thanks.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-04-21 9:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-12 9:14 [U-Boot] [PATCH] xilinx_ppc_boards: Change address of RESET_VECTOR Ricardo Ribalda Delgado
2011-01-19 7:18 ` Wolfgang Denk
2011-04-21 9:26 ` Stefan Roese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox