From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Fri, 29 Apr 2011 22:47:52 +0200 Subject: [U-Boot] Please pull u-boot-mmc.git In-Reply-To: <1304065909-16710-1-git-send-email-afleming@freescale.com> References: <1304065909-16710-1-git-send-email-afleming@freescale.com> Message-ID: <20110429204752.F0C9FD5270C@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Andy Fleming, In message <1304065909-16710-1-git-send-email-afleming@freescale.com> you wrote: > are available in the git repository at: > > git://www.denx.de/git/u-boot-mmc.git master > > Jason Liu (1): > fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2 > > John Rigby (2): > MMC: make b_max unconditional > MMC: omap_hsmmc.c: disable multiblock rw on old rev omap34xx silicon > > Matt Waddel (2): > MMC: Add support for PL180 ARM mmc device > ARMV7: Vexpress: Add MMC support > > Thomas Chou (2): > mmc_spi: add mmc_init call > mmc: coding style fix and tabify of mmc.h > > board/armltd/vexpress/ca9x4_ct_vxp.c | 9 + > common/cmd_mmc_spi.c | 1 + > drivers/mmc/Makefile | 1 + > drivers/mmc/arm_pl180_mmci.c | 443 ++++++++++++++++++++++++++++++++++ > drivers/mmc/arm_pl180_mmci.h | 183 ++++++++++++++ > drivers/mmc/bfin_sdh.c | 2 + > drivers/mmc/davinci_mmc.c | 3 +- > drivers/mmc/fsl_esdhc.c | 4 + > drivers/mmc/gen_atmel_mci.c | 2 + > drivers/mmc/mmc.c | 8 +- > drivers/mmc/mxcmmc.c | 2 + > drivers/mmc/omap_hsmmc.c | 10 + > drivers/mmc/s5p_mmc.c | 1 + > include/configs/ca9x4_ct_vxp.h | 4 + > include/mmc.h | 46 ++-- > 15 files changed, 689 insertions(+), 30 deletions(-) > create mode 100644 drivers/mmc/arm_pl180_mmci.c > create mode 100644 drivers/mmc/arm_pl180_mmci.h Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de In order to succeed in any enterprise, one must be persistent and patient. Even if one has to run some risks, one must be brave and strong enough to meet and overcome vexing challenges to maintain a successful business in the long run. I cannot help saying that Americans lack this necessary challenging spirit today. - Hajime Karatsu